Special Tools Required - Honda Civic 2002-2003 Service Manual

~.
•
Special Tools Required
• Driver 07749-0010000
• Attachment, 52 x 55 mm 07746-0010400
NOTE: Refer to the Exploded View as needed during
this procedure.
1. Test the alternator and regulator before you
remove them (see page 4-221.
2. Remove the alternator (see page 4-29).
3. If the front bearing needs replacing, remove the
pulley locknut with a 10 mm wrench (A) and a
22 mm wrench (B). If necessary, use an impact
wrench.
B
\
4. Remove the harness bracket (A), insulator (B), three
flange nuts (C), and the screw (D), then remove the
plate terminal (E).
c
r--:'I
l!::!.I
6. Remove the brush holder (A), voltage regulator (B),
and the rubber seal (C) .
(conl'd)
4-31