Honda Civic 2002-2003 Service Manual page 68

12. With a hammer and commercially available tools
shown, install a new rear bearing on the rotor shaft.
NOTE: Install the bearing using the inner race.
13. Remove the front bearing retainer plate.
f \
@ .
G." .
.,. e
4
,
- - -----
14. Support the stator housing in a vise, and drive out
the front bearing with a brass drift and hammer.
15. With a hammer and the special tools, install a new
front bearing in the stator housing.
07749-0010000
07746-0010400
(conl'd)
4-33