Table of Contents
Advertisement
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
10.
Job source library compilation
These messages may appear while the system is compiling JSL
using PDL. PDL messages are assigned to levels 0-9, depending
on the severity of the condition being reported. These levels are
indicated by the first number appearing after the PD prefix of the
code.
The levels are as follows:
Level 0-compilation
Level 1-information
Level 2-routine maintenance or actions
Level 4-system or tape problems
Level 7-system problems
Level 8-software errors
Level 9-hardware errors.
Note: For instructions on compiling JSLs and a list of PDL
commands, refer to your Xerox 4850/4890 HighLight Color LPS
Print Description Language.
PD0100
NOREPLACE specified
A JDL object file that already exists was recompiled with a
NOREPLACE option. The new file will not replace the already
existing one.
Action
None.
PD0150
REPLACE specified
A JDL object file that already exists was recompiled with a
REPLACE option. The new file will not replace the already
existing one.
Action
None.
PD0200
JDL replaced
A JDL file was replaced by a new file with the same name.
Action
None.
PD0300
Nothing to print. PDL terminated
The system cannot find a file to print. The PDL instructions are
being canceled.
Action
None.
(PDL) messages
10-1
Advertisement
Table of Contents
