Xerox 4850 HighLight Color Message Manual page 78

OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-20
OS1294 Invalid paper tray selected. Command ignored.
You entered a command that uses a feeder tray which is not in
your printer configuration. For example, trays 3 and 4 can only
be selected when your printer has a high-capacity feeder.
Action Select a feeder tray in your printer configuration.
OS1295 Destination trays not configured for this command.
You entered a command that is invalid for the stacker tray
configuration of the printer.
Action Reenter the command using a stacker tray available on your
system.
OS1296 There is no STOCKSET specified at this time.
You entered the CLUSTER SET or CLUSTER SET N/R command
but did not specify the collection of stocks available for the print
job.
Action Refer to the Xerox 4850/4890 HighLight Color LPS PDL Reference
for more information.
OS1297 There are no current trays in any cluster
You entered the CLUSTER command but did not define any
clusters.
Action Define the cluster you want.
OS1298 Specified paper tray not present.
You entered a command the uses a feeder tray not available in
your printer configuration.
Action Reenter the command specifying a feeder tray that is available on
your system.
OS1300 Number of active forms is n
During installation, the system is allocating the indicated
maximum number of forms (0 to 64) it will attempt to keep in
memory for each print job.
Action None.
OS1310 Number of active fonts is n
During installation, the system is allocating the indicated
maximum number of fonts (0 to 128) it will attempt to keep in
memory for each print job.
Action None.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE