Xerox 4850 HighLight Color Message Manual page 152

OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-94
OS6909 Misregistration detected. Pages will be purged.
The printer detected a paper misregistration. It purges and
reimages any misregistered pages.
Action None.
OS6910 Too much data on page. Page cannot be printed.
Variable data, form data, or both will not fit on the page the
system is imaging. The system does not print the job.
Action Recreate the job, reducing the amount of data per page.
OS6920 Line exceeded page limit. Line truncated.
A new margin took effect or a new line was started. The current
line length is longer than the page size. The excess was cut off.
Action 1. Check the JDL/DJDE MARGIN commands and change the
margin size.
2. Make sure the correct paper size was specified at sysgen.
3. If the problem recurs, recreate the job, changing the line
length, font size, and carriage returns as required.
OS6930 Disk interleaved reference count exceeds image count
The DJDE specified more graphic images than are included in the
graphic section of the current SDI job.
Action 1. Perform one of the following actions:
— Recode the DJDE, reducing the number of graphic
callouts.
— At the host, change the program that writes images to
shared disk, increasing the number of graphics.
2. Restart the job.
OS6931 Disk interleaved image count exceeds reference count
The DJDE specified fewer graphic images than are included in the
graphic section of the current SDI job.
Action 1. Perform one of the following actions:
— Recode the DJDE, changing the number of graphic
callouts.
— At the host, change the program that writes images to
shared disk, reducing the number of graphics.
2. Restart the job.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE