Xerox 4850 HighLight Color Message Manual page 236

Laser printing systems
Table of Contents

Advertisement

INTERPRESS (IP) ERROR MESSAGES
18-16
Font problem; incompatible font file format: "local font
name."
The identified font was created for another printer.
Action
None.
Font problem; number of data fonts exceeds n on this page.
The number of fonts for an Interpress page exceeds the FONTS
command value. This message does not occur on an LPS with
RIP since any extra fonts are processed on RIP. Increasing the
FONTS command value on an LPS with RIP may upgrade the
performance by reducing the amount of text processed by RIP.
Action
Increase the FONTS command value to satisfy the maximum
number of fonts used on a page.
Form problem; form image "file type local image name" not
found.
The form file in the previous problem with the insert file message
references an image that does not exist on the LPS.
Action
1. Copy the identified image onto the printer, change the form
referenced, or modify the requested form.
2. Resend the document.
Form problem; form/job paper size mismatch: "file type local
form name."
The form file identified was compiled with a paper size that does
not match the specified page paper size.
Action
1. Change the form referenced in the document or recompile
the form with the correct paper size.
2. Resend the document.
Illegal operator ordering; FSET must precede FGET.
An uninitialized frame element was found. This problem is
caused by a previous MARK Recovery that resulted from a
previous master or page error.
Action
None.
Imaging requirements beyond Publication Set for operator:
operator name.
An object in the document is not imaged because it requires the
professional graphics level of Interpress for correct rendering.
Action
None.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4890 highlight color

Table of Contents