Xerox 4850 HighLight Color Message Manual page 201

Laser printing systems
Table of Contents

Advertisement

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
QM2004
Value entered is out of range, please re-enter
You entered an invalid parameter for the CLEAR QUEUE,
INITIALIZE QUEUE, or JOBS command.
Action
Check the parameter and retry the command.
QM2010
Change housing or
The jobs in the queue require a resource that is not available.
Action
Perform the actions described in the messages.
QM2020
Enter appropriate SUB INK command or
QM2025
Enter STITCH OFF if stitcher is not functional
The jobs in the queue require a resource that is not available.
Action
Perform the actions described in the messages.
QM2200
Run COMPRESS and INITIALIZE QUEUE
The system cannot create QUE.SYS, which is the queue database
file, and QMGR.SYS, which is the recovery file. The following
messages display:
QM1450 Queue Manager is functioning in a degraded mode
QM2200 Run COMPRESS and INITIALIZE QUEUE
Action
1. Delete files from the disk or run COMPRESS to make more
space available for the queue database files.
2. Enter the INITIALIZE QUEUE command.
QM2650
Queue database file is nearly full
Execute queue file save procedure
Use CLEAR QUEUE after file save
The queue database file, QUE.SYS, is almost full. Warning flags
have appeared to indicate the queue database is nearly full.
Action
When the system is idle, you can convert the new QUE.SYS to
the old STAFIL.SYS file or you can save the QUE.SYS file to tape
or floppy disk. Perform one of the following actions:
To convert the QUE.SYS file to STAFIL.SYS, enter SFC.
To save the QUE.SYS file to tape or floppy disk, perform
these steps:
A. Enter SFC SAVE to save QUE.SYS to QUE.TMP. To save
QUE.SYS to another name, enter SFC SAV
filename.filetype, where filename is a sequence of one
to six alphanumeric characters and filetype is TMP or
MSC.
B. Enter COPY TAPE WRITE LABEL filename.filetype or
FLOPPY SAVE filename.TMP to write to tape the file you
created in step A.
Enter FLOPPY SAVE filename.TMP to write to floppy disk
the file you created in step A.
QUEUE MANAGEMENT (QM) MESSAGES
13-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

4890 highlight color

Table of Contents