Xerox 4850 HighLight Color Message Manual page 250

HARDCOPY GRAPHICS PRINTING (PR) COMMAND MESSAGES
20-2
PR2600 Not enough space on disk to HARDCOPY
The selected file cannot be hardcopied because the print file is
not large enough to hold it.
Action 1. Use the REALLOCATE command to enlarge the print file.
(Refer to your 4850/4890 HighLight Color LPS Command
Reference for additional information.)
2. Reenter the HARDCOPY command.
PR2710 Scale factor invalid, check and retry
You entered the n/d scale parameter of the HARDCOPY
command incorrectly.
Action Reenter the command correctly. (Refer to your 4850/4890
HighLight Color LPS Command Reference for additional
information.)
PR2720 HPOS value out of range, check and retry
You entered a number for horizontal position (hpos) parameter
of HARDCOPY command that is beyond the permitted range.
Action Reenter the command correctly. (Refer to your 4850/4890
HighLight Color LPS Command Reference for additional
information.)
PR2730 VPOS value out of range, check and retry
You entered a number for vertical position (vpos) parameter of
HARDCOPY command that is beyond the permitted range.
Action Reenter the command correctly. (Refer to your 4850/4890
HighLight Color LPS Command Reference for additional
information.)
PR2760 File not found, check and retry
The file specified in the "file name" parameter of HARDCOPY
command does not exist on system disk.
Action 1. Verify the desired file name and reenter the command.
2. If the message reappears, load the desired .IMG file to disk.
(Refer to your 4850/4890 HighLight Color LPS Command
Reference for additional information.)
PR2780 No files found matching mask
No files were found containing filename characters entered in the
"mask" option of the HARDCOPY command.
Action 1. Recheck and correct "mask" characters. (Refer to your
4850/4890 HighLight Color LPS Command Reference for
additional information.)
2. Reenter the command.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE