Xerox 4850 HighLight Color Message Manual page 176

JOB SOURCE LIBRARY COMPILATION (PDL) MESSAGES
10-2
PD0500 No source file will be created
The system cannot create a source file due to an unspecified
error.
Action Check the file and make corrections if needed.
PD0510 Source file is full
A thousand records (maximum allowable) were written to the
source file.
Action Copy records to the disk and compile them.
PD0900 Abort requested by operator
You entered the ABORT command. The PDL task will be
canceled.
Action None.
PD1000 PDL terminated
The end of the JSL was reached.
Action None.
PD1050 Exiting PDL to print
The JSL was successfully compiled. The system will print a listing
of the JSL.
Action None.
PD1100 ************* JSL contained errors *************
The JSL contained some incorrect entries.
Action 1. Check the specified feature setting.
2. Edit the JSL entries.
3. Recompile the JSL.
PD2700 Operator command error, retry
You entered a PDL command incorrectly.
Action Reenter the command correctly.
PD2740 JSL not found. Check and retry.
You entered the JSL id incorrectly.
Action Perform one of the following actions:
• Reenter the JSL identification correctly.
• Enter a different JSL identification.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE