Pdl (Job Source Library Compilation) Messages - Xerox DocuPrint 96 Message Manual

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
7.
These messages may appear while a Job Source Library is being
compiled using Print Description Language (PDL). PDL messages
are assigned to levels 0-9, depending on the severity of the condition
being reported. These levels are indicated by the first number
appearing after the "PD" in the code.
The levels are as follows:
Level 0—confirmation
Level 1—information
Level 2—routine maintenance or actions
Level 4—system or tape problems
Level 7—system problems
Level 8—probable severe software errors
Level 9—probable severe hardware errors
Note: For instructions on compiling JSLs and list of PDL
commands, refer to your DocuPrint 96/DocuPrint 96MX LPS PDL
Reference .
PD0100 Noreplace specified.
A JDL object file that already exists was recompiled with
NOREPLACE option. The new file will not replace the already
existing one.
Action None.
PD0150 Replace specified.
A JDL object file that already exists was compiled again with the
REPLACE option. The new file will replace the already existing one.
Action None.
PD0200 JDL replaced
A JDL file has been replaced by a new file with the same name.
Action None.
7PDL (job source library
compilation) messages
7-1