Xerox 4850 HighLight Color Message Manual page 101

Laser printing systems
Table of Contents

Advertisement

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS2020
Mount next volume; 'CONTINUE I' when ready.
The system is processing a multivolume job and encountered the
End of Volume magnetic tape label.
Action
1. Load the magnetic tape reel containing the next volume of
the report. Refer to the Xerox 4850 HighLight Color LPS
Operator Guide or to the Xerox 4890 HighLight Color LPS
Operator Guide for more information.
2. Enter the CONTINUE I command to resume input.
OS2025
Remount volume n for next copy of report. CON I when
ready.
The system is processing multiple copies of multivolume reports
in noncollate mode and is now ready to reprocess the indicated
numbered volume of the current report. Multivolume reports
include those with copy-sensitive CMEs and those that exceed
the size of the print file and require hand collation.
Action
1. Reload the magnetic tape reel containing the indicated
volume number. Refer to the Xerox 4850 HighLight Color
LPS Operator Guide or to the Xerox 4890 HighLight Color
LPS Operator Guide for more information.
2. Enter the CONTINUE I command to resume input.
OS2030
Tape at EOV; 'CONTINUE I' will rewind tape.
The system reached the End of Volume label on the input tape.
Because JSL contains the EOV = PAUSE statement, the tape does
not rewind automatically.
Action
Enter the CONTINUE I command to rewind the tape.
OS2035
INPUT stopped. Enter CONTINUE I when host is ready.
A software failure caused a system rollover and caused the host
to discontinue data transmission. The system is initiating
automatic job recovery.
Action
1. Make sure the current job was backed up the required
number of pages so that no data is lost.
2. Enter the CONTINUE I command to resume input.
OS2042
Check paper supply in tray 3
Feeder tray 3 is lowered or out of paper.
Action
Check tray 3 and add paper, if necessary.
OS2043
Check paper supply in tray 4
Feeder tray 4 is lowered or out of paper.
Action
Check tray 4 and add paper, if necessary.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-43

Advertisement

Table of Contents
loading

This manual is also suitable for:

4890 highlight color

Table of Contents