Xerox 4850 HighLight Color Message Manual page 10

DATA CAPTURE UTILITY (DCU) MESSAGES
2-2
DC1030 DCU exiting.
You entered the DCU EXIT command and responded with Yes to
the confirmation prompt. DCU has now stopped capturing data.
Action None.
DC1040 DCU formatting to console: CONSOLE
You entered the DCU FORMAT CONSOLE DISPLAY command.
This message indicates formatting is taking place and is being
output to the console.
Action None.
DC1041 DCU formatting to printer: CONSOLE
You entered DCU FORMAT CONSOLE PRINT. Formatting is
taking place and is being output to the printer.
Action None.
DC1045 DCU formatting stopped. No captured data to format.
You entered the DCU FORMAT command. The requested
captured data was not present in the DCU database because it
was deleted or because the DCU was inactive for the specified
time.
Action Enter DCU CAP to restart DCU capturing if DCU was turned off.
DC1060 Data capturing is currently inactive
You entered the DCU SHOW STATUS command when DCU was
turned off.
Action Enter DCU CAP to restart DCU capturing.
DC1080 DCU disconnecting from device: CONSOLE
This informative message displays in response to a DCU
CAPTURE OFF command.
Action None.
DC1090 Invalid DCU command: Retention period >40 days
You entered the DCU CAPTURE command with a retention
period greater than 40 days. The command was rejected.
Action Reenter the command using a retention period of 40 days or
less.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE