Xerox 4850 HighLight Color Message Manual page 142

OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-84
OS6660 Begin value is off the paper.
The BEGIN statement in the JDL specifies that printing is to start
at a point located off the paper currently loaded in the printer.
The system aborts the job.
Action None.
OS6670 Form paper size too small. Form will not be printed.
The paper size specified for the form is smaller than the size
specified by the PAPERSIZE statement in the JSL. Input is
stopping.
Action 1. Perform one of the following actions:
— Enter the CONTINUE I command to print the job without
the form.
— Enter the ABORT I command to cancel the job.
2. Recode the JSL or FSL identifying a paper size that matches
the other paper size specifications in the JSL or FSL.
3. Restart the job.
OS6680 Form paper size too large. Form will not be printed.
The paper size specified for the form is larger than the size
specified by the PAPERSIZE statement in the JSL. Input is
stopping.
Action 1. Perform one of the following actions:
— Enter the CONTINUE I command to print the job without
the form.
— Enter the ABORT I command to cancel the job.
2. Recode the JSL or FSL identifying a paper size that matches
the other paper size specifications in the JSL or FSL.
3. Restart the job.
OS6690 Report aborted due to an inexact paper size.
The system aborted the current report due to a paper size
mismatch.
Action None.
OS6700 Syntax error in DJDE.
A wrong format or word was used in coding a DJDE record.
Action 1. Recode the DJDE correctly.
2. Restart the job.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE