Xerox 4850 HighLight Color Message Manual page 122

Laser printing systems
Table of Contents

Advertisement

OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-64
OS2885
Max number of fonts exceeded. Enter new value. Restart
job.
The JDE called for more fonts per page than were specified at
installation. The system aborts the job.
Action
1. Enter the JDE or DJDE command calling for a number of
fonts with the range established at installation.
2. Restart the job.
OS2900
Input block length exceeds JDE max, do the following:
*Abort and retry, specifying another JDE/JDL.
A block was input, exceeding the maximum block length
specified by JDE. If the job is printed, text is lost or misplaced.
Action
1. Enter the ABORT I command.
2. Resend the job specifying a JDE/JDL that calls for greater
block length.
OS2910
No accounting file entry for department.
No accounting file was set up at installation for the department
name you entered. The system reports data in a file called
NODEPT.
Action
Enter the account command to establish a file for the
department.
OS2915
Security violation.
From the wrong logon level, you requested a file that is
protected by the ABNORMAL SECURITY = YES command.
Action
To access the file, obtain the correct password and log on at
Level 5.
OS2916
Improper file format. Record size is not 80 bytes
The record size of the ink override file is not equal to 80 bytes.
Action
Reformat the ink override file by splitting the ink-name or ink-
name list across sequential records in the file or by completely
rewriting the file.
OS2920
FEX Error, FEXDMP.JDL not found. Recompile FEX.JSL
FEX cannot find the file you requested on the system disk.
Action
1. Recompile the FEX.JSL.
2. Reenter the FEX command.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4890 highlight color

Table of Contents