Table of Contents
Advertisement
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS2270
MAIN cluster has no current trays.
OS2271
MAIN cluster has no ready trays.
OS2275
AUX cluster has no current trays.
OS2276
AUX cluster has no ready trays.
OS2280
Cluster cluster name has no ready trays.
These messages indicate a problem exists with the specified
cluster.
Action
1. Use the CLUSTER command to define the cluster or to add
current trays.
2. If the cluster has current trays, make sure at least one current
tray is ready.
3. Use the FEED command to override the clusters.
OS2282
Current feed cluster deleted.
The current feed cluster was deleted. The system uses the
default of MAIN.
Action
Use the FEED cluster name command to change from the
default, if desired.
OS2285
Cluster cluster name has no trays. Add trays via CLU or
change feed
OS2286
Cluster cluster name is undefined. Define via CLU or change
feed.
These messages indicate a problem exists with the specified
cluster.
Action
1. Use the CLUSTER command to define the cluster or to add
current trays.
2. If the cluster has current trays, make sure at least one current
tray is ready.
3. Use the FEED command to override the clusters.
OS2288
Warning: Current SELECT command overrides data
destination value. Change SELECT command or CON O
The data stream contains a DESTINATION=EXPORT statement,
and the current operator SELECT keyin is other than AUTO or E.
Action
1. Change SELECT to AUTO or E to enable the Bypass Transport
as the destination.
2. Press <CON> to override the data stream destination and
send the paper to the selected destination.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-47
Advertisement
Table of Contents
