Table of Contents
Advertisement
INTERPRESS (IP) ERROR MESSAGES
18-10
Operator requested job abort.
The ABORT I command terminated document processing at the
end of the current page.
Action
None.
Page too complicated; too many fonts + forms + operators
text + graphics.
The page is too complicated to print.
Action
Reduce the complexity of the page and resend the job.
Parse failure; stack underflow.
During interpretation of an Interpress master, an attempt to
move an operand off the Interpress stack failed because the stack
was empty.
Action
None.
Requested memory length exceeds maximum size limit.
The Interpress decomposer has a maximum operand size of
16,000 bytes, and its limit was exceeded.
Action
None.
Second system rollover.
A second rollover has occurred. The document cannot be
processed.
Action
None.
Too many errors in document.
Too many errors were found in the document to continue
processing.
Action
1. Correct the errors reported on the summary sheet.
2. Resend the document.
Too many "unexpected RIP errors" encountered.
The integrity of the Raster Image Processor (RIP) board is suspect
due to the number of unexpected errors; therefore, RIP will no
longer be used.
Action
1. Download the RIP software with the PSC RIP command.
2. Resend the document.
3. If the problem continues, contact your service representative.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Advertisement
Table of Contents
