Table of Contents
Advertisement
STATUS FILE SERVICES (SFS) COMMAND MESSAGES
16-4
SF6061
W - TEXT TRUNCATED
Input text is too long to fit into the column width specified in
the WIDTH statement. The system will enter only as many
characters as will fit, ignoring the rest, and compile the form.
Action
Recompile the form reducing the size of the text entry.
SF6062
W - DEFAULT VALUE ASSUMED FOR 'LENGTH'
No LENGTH statement was entered for the user-created form.
The system will use the WIDTH value or the actual length of the
content of the column, whichever is smaller, and compile the
form.
Action
None.
SF6063
W - LENGTH OF CONTENT TRUNCATED
The column width value specified in the WIDTH statement for
the user-created form is smaller than the actual content of the
column. The system will enter only as many characters as will fit,
ignoring the rest, and compile the form.
Action
None.
SF6070
E - VALUE FOR 'WIDTH' UNSPECIFIED OR EXCEEDS LIMIT
The value entered for the WIDTH statement for a user-created
form is larger than that permitted for the column width, or no
WIDTH statement was entered. The column will not be created.
The letter E indicates a user-input error exists in a column
command, and the column will be ignored.
Action
Recompile the form and enter the WIDTH statement correctly.
SF6071
E - VALUE FOR 'CONTENT' UNSPECIFIED
No CONTENT statement was input for the column. The column
will not be created.
Action
Recompile the form and enter the CONTENT statement correctly.
SF9500
IRRECOVERABLE DISK OR CONVERSION ERROR
Either a status file does not exist, or the requested entry does
not exist.
Action
If the status file does not exist, initiate the SFC command to run
SFC. Refer to the Xerox 4850/4890 HighLight Color LPS
Command Reference for more information on the SFC
command. Otherwise, check your requested entry and correct it.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Advertisement
Table of Contents
