Finishing Configuration (Fcg) Messages - Xerox 4850 HighLight Color Message Manual

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
19.
Finishing configuration (FCG) messages appear when you are
making changes to the finishing device configuration file
(FCG.LIB). This file contains information about any third-party
finishing devices installed on your system.
This chapter lists and describes FCG messages you encounter
while working in the FCG task and describes the appropriate
actions to take. These messages do not have reference numbers.
In addition to the messages listed in this chapter, there are also
some messages having reference numbers beginning with OS
which relate to FCG. These messages are listed in the "Operating
system software" chapter in numerical order.
FCG Usage
FCG <profile label>
FCG WIR[E] <parameter list>
FCG SHO[W]
The FCG usage message displays a list of the available FCG
commands and their syntax. This is an informational message.
Refer to the Xerox 4850/4890 HighLight Color Laser Printing
System Command Reference for more information about the
commands and their syntax.
Action None.
FCG Exiting: Invalid Command.
FCG cannot process the command you entered.
Action Verify the command syntax (refer to the Xerox 4850/4890
HighLight Color LPS Command Reference and reenter the
command.
FCG Exiting: Invalid Profile - Missing Semicolon (;)
The profile entry you selected is missing the required trailing
semicolon.
Action Add a semicolon to the end of the selected profile entry.
Finishing configuration
(FCG) messages
19-1