Table of Contents
Advertisement
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
HP1265
Online interface already in use.
You entered the HIP ONLINE command with the XPF host
selected, but the interface was already in use for online jobs.
Action
None.
HP1270
Change of Job job-id TO file name completed successfully.
The HIP CHANGE command successfully created the file.
Action
None.
HP1280
'HIP RESET' not allowed: Invalid task state.
This message appears when you enter the HIP RESET command,
but HIP is online, jobs in the HIP queue are not completed, or
both. HIP must be offline, and all jobs must be completed
before the system will perform the reset.
Action
None.
HP1281
ONLINE not allowed while OFFLINE pending or END pending.
This message appears in the following situations:
•
HIP is online to the XNS interface.
•
You enter HIP OFFLINE or HIP END.
•
HIP can not go offline or end, usually because there is still an
active XNS session.
•
You enter a HIP ONLINE command, which will be rejected
because HIP is still waiting to go offline.
Action
None.
HP1290
HOST suspended pending pass-through job initiation.
The printer is online to the XPF host and the host instructs the
printer to enter pass-through mode.
Action
None.
HP1291
HIP resuming following pass-through job.
The pass-through job completed, and HIP is ready to receive
data.
Action
None.
HP1298
XPSM communications recovered.
Communication with the XPS host has resumed after a printer
crash. If the job being transmitted at the time of the crash can
be recovered, transmission of that job will resume.
Action
None.
HOST INTERFACE PROCESSOR (HIP) MESSAGES
7-7
Advertisement
Table of Contents
