Table of Contents
Advertisement
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-104
OS8500
System reliability log lost.
The system reliability log (error log) file cannot be accessed due
to an apparent file management problem.
Action
1. Enter the PROBLEM command to help define the condition.
2. Resysgen the disk to correct the problem if you are
authorized to do so. If you are not, contact your service
representative.
OS8550
Drive n not useable: No disk ID.
The indicated disk was not formatted for your system.
OS8555
Drive n not useable: Wrong disk ID.
The indicated disk was moved from another system and was not
formatted for this system.
OS8560
Drive n not useable: Should be drive yyy.
The indicated disk was formatted as drive yyy and then was
moved to the xxx position. The system cannot use the disk in
the new position until it is reformatted.
Action
Format the disk for your system.
OS8600
Unsuccessful completion of send data directive.
This message displays once you confirm the reset of the job in
progress following a system disk error. This message follows:
OS1000 Ready for commands hh:mm:ss
Action
None.
OS8650
INPUT has recovered to next job in queue.
OS8651
OUTPUT has recovered to next job in queue.
During automatic job recovery after a system rollover, the output
task tried twice to recover data on the same page and tried once
to recover the next report. Since the output task cannot print
this job, it moves to the next job.
Action
1. Print the next job.
2. Submit an abort analysis dump (produced by the system
during the recovery process) to your service representative.
OS8700
Incorrect version of accounting file
The account file is corrupt or outdated.
Action
Contact your service representative to obtain the correct
software for the accounting file.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Advertisement
Table of Contents
