Os Level 9: Probable Severe Hardware Errors - Xerox 4850 HighLight Color Message Manual

OS level 9: Probable severe hardware errors

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS8985 Unable to initiate HIP task
The system cannot start the HIP task.
Action 1. Wait until the system is idle, then retry.
2. If the problem persists, reload the system software.
OS8989 Unable to initiate named task
The system is unable to begin the indicated procedure due to a
fatal software error. Another message usually displays to explain
the nature of the error condition.
Action 1. Check the display for other messages and follow the
instructions provided for each message as described in this
guide.
2. If the problem continues, contact your service representative.
OS8990 Unable to initiate OUTPUT task.
The system cannot find or read from disk the output task you
requested.
Action 1. Enter the RESET command.
2. Restart the job.
3. If the message reappears, reboot the system by pressing the
Boot button and entering B.
4. If the problem continues, resysgen the disk if you are
authorized to do so. If you are not, contact your service
representative.
OS level 9 messages indicate a severe problem may exist with
your hardware and advise you of necessary actions to take.
OS9050 Unexpected error detected by RIP enter:
A RIP error occurred.
Action Enter the CONTINUE or ABORT command as appropriate.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-107