Xerox 4850 HighLight Color Message Manual page 229

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Invalid argument(s) value for operator:
printing instruction name.
The Interpress master was incorrectly formatted, and the
identified printing instruction has an invalid argument.
Action None.
Invalid element type: ENCODED VECTOR.
An error in an element of a printing instruction property vector
was detected.
Action None.
Malformed installed font; "file type local font name" is an
old font; update.
The LPS font identified in the message is an old version and may
not be referenced through IPFNTS.JSL. Essentially, the font is a
proportional-spaced font without a spacing table in the font
header.
Action 1. Remove or replace the reference to the font in IPFNTS.JSL.
2. Recompile by entering the IFU IPFNTS command.
Master not well-formed; END not found.
The Interpress master was not created according to standard, and
the physical end of file was reached before the compilation's
END operator was encountered.
Action None.
No resources; graphic(s) exceed memory configuration.
The compressed IMG data for the page exceeded the amount of
memory available in the graphics option board (GVG or GHO).
Action None.
No resources; graphic(s) exceeds memory unit.
The compressed (IMG) data for the page exceeded the amount
of memory available in the GVG option.
Action None.
No resources; insufficient dynamic memory.
Virtual memory space was exhausted during Interpress master
processing, and the job was aborted.
Action None.
INTERPRESS (IP) ERROR MESSAGES
18-9