Table of Contents
Advertisement
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-102
OS8050
IPD internal initialization failure
The system detected an unexpected error when initializing IPD
and aborted the job.
OS8051
IPD communication initialization failure
The system detected an unexpected error when trying to open
communications with input and aborted the job.
OS8052
IPD dynamic memory initialization failure
The system detected an unexpected error when IPD failed to
aquire sufficient memory and aborted the job.
Action
1. Reset the system before entering the next START command.
A. Enter the RESET command.
B. Resend the job.
2. If the message reappears, use HIP to stop communications
and reboot the system.
A. If HIP is active, enter the HIPSTOP: FFLINE command.
B. Press the Boot button and enter B.
C. Enter the HIP ONLINE:START command, if desired.
D. Resend the job.
3. If the message reappears, resysgen if you are authorized to
do so. If you are not, contact your service representative.
OS8053
IPD file management initialization failure (IPDDIR.SYS)
IPD could not locate or create the IPDDIR.SYS file, and the job
was aborted.
Action
1. Rename the IPDDIR.SYS file, giving it a name such as
BADnnn.TMP.
2. Resend the job.
3. Contact your service representative to log the bad sector and
delete the file you named BADnnn.TMP.
OS8100
Requested task already active - reboot the system.
The task is still active, which may be due to improper job
recovery after a software failure.
Action
Press the Boot button and enter B to reboot the system and
force the proper recovery.
OS8200
Invalid TMCB received from a task.
A task message control block (information sent from one task to
another) was sent to the wrong task.
Action
1. Enter the RESET command.
2. Retry the job.
3. If the problem continues, contact your service representative.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Advertisement
Table of Contents
