Xerox 4850 HighLight Color Message Manual page 33

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
FL6035 Unable to read master file directory
The system was unable to read the file directory of the floppy
disk.
Action Format and initialize the floppy disk.
FL6100 Diskette is not double sided
The floppy disk you are using is not double–sided.
Action Inserted a low-density (double-sided) floppy disk in the drive.
FL6110 Cannot format
Cylinder =
The system cannot format the floppy disk.
Action Use another floppy disk.
FL6120 Tracks not formatted
The system detected a number of tracks on the floppy disk that
are not formatted properly.
Action Perform the procedure to format the floppy disk. If the message
recurs, replace the floppy disk in the drive with another floppy
disk.
FL6125 Floppy does not have the latest file directory
The floppy disk file directory detected by the system is from an
older version of software.
Action Format and initialize the floppy disk.
FL6135 Unable to open file
The system cannot access the file, and the function could not be
completed.
Action Retry the operation. If the message recurs, contact your service
representative.
FL6140 Tape read error
The system detected an error in reading the files from the tape.
Action Make sure the tape is mounted properly.
FL6150 Illegal function code
The system detected an I/O request error.
Action Retry the operation. If the message recurs, contact your service
representative.
GENERAL FLOPPY UTILITY (FLF) MESSAGES
5-11