Table of Contents
Advertisement
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-16
OS1175
Command not allowed while task is active
The system cannot process your command while the indicated
task is in progress.
Action
1. Exit the indicated task.
2. Reenter the command.
OS1180
Invalid response
You incorrectly entered a response to a prompt.
Action
Reenter the response, making sure you have included the correct
type and number of characters.
OS1185
Command ignored - Currently loaded primary could not be
found in ink catalog. Update catalog.
The ink you specified is not listed in the ink catalog.
Action
Update the catalog to include the ink or specify another ink for
this job.
OS1190
Invalid parameter, command ignored
You entered a SUB DEV command that contained incorrect
parameters or syntax. For example, you may have specified an
undefined cluster for one with no current trays. If a cluster name
is not defined or the cluster has no tray, the message OS1291
displays, which contains more specific information.
Action
1. Verify the clusters you are using for your job.
2. Reenter the SUB DEV command.
OS1191
No substitution for color is currently in effect
The system does not allow you to substitute an ink for the one
indicated for this job.
Action
Run the print job with the specified ink or abort the job.
OS1195
Undefined ink: color
The ink you specified is not supported.
Action
1. Make sure the ink name is entered correctly.
2. If the message reappears, see your service representative.
OS1200
Command not allowed while HIP or SDI active
The system is unable to respond to the entered command while
the printer is communicating with the host interface processor.
Action
1. Terminate the connection with the host interface processor.
Refer to the Xerox 4850 HighLight Color LPS Operator Guide
or to the Xerox 4890 HighLight Color LPS Operator Guide
for more information.
2. Reenter your command.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
Advertisement
Table of Contents
