Xerox 4850 HighLight Color Message Manual page 121

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS2871 SDI job saturates shared disk - possible actions:
Release SDI jobs and enter "CONTINUE I"
Enter "PRINT1" to print 1 copy of current report
Enter "ABORT JOB#" to abort current job
The shared disk is full.
Action Take one of the recommended actions to continue print job
processing.
OS2872 Input waiting for shared disk space.
Schedule any HELD SDI reports
The shared disk is full and cannot accept any more incoming
jobs.
Action Clear the held reports by making the required resources available
to the printer. This may involve changing the dry ink installed in
the printer, entering a SUB INK command, making the stitcher
available, and so forth.
OS2875 Disk saturation ended. INPUT resuming.
The system allows input to resume normal speed because
enough space exists on the system disk.
Action None.
OS2876 Disk full, reclaiming disk space, INPUT stopped.
The system disk contains too many temporary files. The system
displays this message while it stops input processing and reclaims
space on the system disk.
Action None.
OS2877 Reclaiming disk space.
The system disk contains too many temporary files. The system
displays this message while it reclaims space on the system disk.
Action None.
OS2880 Max fonts & forms exceeded. Enter new value. Restart job.
The JDE called for more fonts and forms per page than were
specified at installation. The system aborts the job.
Action 1. Enter the JDE or DJDE command calling for a number of
forms and fonts with the range established at installation.
2. Restart the job.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-63