Compress (Cp) Command Messages - Xerox 4850 HighLight Color Message Manual

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
1.
COMPRESS (CP) command messages may appear during the
process of compressing the system disk.
This chapter lists and describes each CP message and provides
the appropriate actions to take as required. Refer to your Xerox
4850/4890 HighLight Color LPS Command Reference for
additional information.
CP1010 COMPRESS now restoring the print file
You entered the COMPRESS command. The process has moved
the print file to a different area of the system disk.
Action None.
CP1020 NOW PROCESSING DP0:
CP1030 NOW PROCESSING DP1:
CP1040 NOW PROCESSING DP2:
CP1050 NOW PROCESSING DP3:
You entered the COMPRESS command. The system is currently
compressing the indicated disk pack unit.
Action None.
CP1800 COMPRESS processor aborting.
You entered the ABORT command during the compress process.
The system disk is partially compressed.
Action None.
CP1900 Insufficient working memory for COMPRESS.
Not enough dynamic memory exists for the compress process.
Action Contact your service representative to obtain additional memory
capacity.
CP2700 Invalid keyin.
You entered the COMPRESS command incorrectly.
Action Reenter the command correctly.
COMPRESS (CP)
command messages
1-1