System Problem Messages - Xerox 4850 HighLight Color Message Manual

INTERPRESS (IP) ERROR MESSAGES

System problem messages

System Problem:
18-22
Processing nested too deep.
Nesting of Interpress bodies exceeds the program stack space of
the decomposer.
Action None.
Too many "Page Warnings" on this page.
Too many page warnings were found to continue processing the
page, and a MARK Recovery to the next page was performed.
Action None.
System problem messages begin with one of these phrases:
System Problem:
System Problem (page n):
The text following the colon differs, depending on the type of
error the system encounters. The varying portions of the
problem messages follow in alphabetical order.
Accounting initialization failure.
A problem processing the accounting information was found.
Action None.
Can not record errors; "SYS>RTXFIL" missing resysgen.
The file that stores errors during processing of the Interpress
master is not on the LPS.
Action If authorized to do so, perform a resysgen to restore RTXFIL.SYS,
or contact your service representative.
Incorrect version of the accounting file.
An error was detected in the version identifier of the accounting
file while logging the accounting information.
Action None.
Logical disk address error during Account Initialization.
A problem processing the accounting information was found.
Action None.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE