Table of Contents
Advertisement
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS6758
Word processing file malformed. Retransmit file.
You issued a START command specifying an XCS file that is in the
wrong format.
Action
Contact your service representative.
OS6761
Too many SEF font mapping errors.
A very large number of short-edge-feed font mapping errors
occurred.
Action
Correct the contents of the mapping file and rerun the job.
OS6775
Internal error in SAM task - Error Code: n.
An internal error occurred.
Action
Record the error code and contact your service representative.
OS6780
Unsupported option in n may affect job integrity.
You submitted a parameter in a DJDE or PDL command, such as
SESMAP or TRANS, which is not supported. This may affect the
appearance or position of your output.
Action
1. Check the output to see if it is satisfactory.
2. If the output is unsatisfactory, recode the JSL, eliminating the
unsupported parameter.
OS6781
Unsupported DJDE option encountered. See OPRINFO page.
The system encountered a DJDE option that is not supported on
this printer.
Action
Check OPRINFO for the unsupported option.
OS6782
Paper size exceeds printer capability.
You specified a larger paper size in the PDL OUTPUT command
than the paper trays can accommodate.
Action
Specify a correct paper size.
OS6819
Improper file format. Record size is not 80 bytes.
The application specified an ink list resident on the disk, but
when the file is accessed, it is found to be the wrong format.
Action
Check the application.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-91
Advertisement
Table of Contents
