Xerox 4850 HighLight Color Message Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. 4850 HighLight Color
  6. Message manual
Xerox 4850 HighLight Color Message Manual

Xerox 4850 HighLight Color Message Manual

Laser printing systems
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Xerox 4850/4890 HighLight Color
Laser Printing Systems
Message Guide
Version 5.0
November 1994
720P93620
XEROX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4850 HighLight Color and is the answer not in the manual?

Questions and answers

Related Manuals for Xerox 4850 HighLight Color

Summary of Contents for Xerox 4850 HighLight Color

  • Page 1 XEROX Xerox 4850/4890 HighLight Color Laser Printing Systems Message Guide Version 5.0 November 1994 720P93620...
  • Page 2 Printed in the United States of America Publication number: 720P93620 Xerox® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged. Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

  • Page 3: Table Of Contents

    13. Queue management (QM) messages 13-1 14. SCALE command messages 14-1 15. Status file creation utility (SFC) command messages 15-1 16. Status file services (SFS) command messages 16-1 17. System verification error messages 17-1 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 4 System problem messages 18-22 System Problem: 18-22 System Problem (page n): 18-23 19. Finishing configuration (FCG) messages 19-1 20. HARDCOPY graphics printing (PR) command messages 20-1 21. HSPP or SDI messages 21-1 Appendix Abbreviations XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 5: Introduction

    Introduction The Xerox 4850/4890 HighLight Color Laser Printing System Message Guide provides a description of all messages that may appear on your system controller display or printed summary sheet, and the appropriate action or actions to take, if any are required.

  • Page 7: Compress (Cp) Command Messages

    COMPRESS (CP) command messages may appear during the process of compressing the system disk. This chapter lists and describes each CP message and provides the appropriate actions to take as required. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for additional information.
  • Page 8 (CPR000.TMP). Action 1. Print the CPR000.TMP error log to locate the problem. 2. Call your service representative and be prepared to provide the information contained in the log. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 9: Data Capture Utility (Dcu) Messages

    DCU messages may appear when entering DCU commands, capturing data, or playing back console activity. This chapter lists and describes each DCU message and provides appropriate actions to take as required. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for additional information on DCU commands.
  • Page 10 Invalid DCU command: Retention period >40 days You entered the DCU CAPTURE command with a retention period greater than 40 days. The command was rejected. Action Reenter the command using a retention period of 40 days or less. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 11 You entered a DCU REMINDER command that has no meaning because data capturing was turned off. Action None. DC1100 DCU FORMAT request was unsuccessful You entered a DCU FORMAT command. This is the final display after an error was encountered. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 12 Purge the unwanted files on the system, then retry the command. DC1700 Logging task active capturing device: CONSOLE You previously invoked a reminder by entering the REMINDER or CAPTURE command. DCU is active capturing console data. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 13 Action 1. Perform one of the following actions: • Delete unnecessary files; • Compress the disks; • Reduce the retention period. 2. Enter DCU CAP to restart DCU capturing. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 14: System Failure Or Reload Messages

    ############################## This message is inserted into the capture file when you reboot the system by pressing the Boot button. It is possible that not all CONSOLE activity was captured prior to the failure. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 15: Disk Save And Restore (Dsr) Messages

    (DSR) commands to save all disk files on tape or restore all files to system disk from tape. This chapter lists and describes each DSR message and provides appropriate actions to take as required. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for more information on DSR commands.
  • Page 16 The system terminated the DSR task. Action 1. Clean the tape drive and retry the task. Refer to the Xerox 4850/4890 HighLight Color LPS Operator Guide for instructions. 2. If the problem continues, replace the save tape.
  • Page 17 File structure integrity error on n . . . DSR aborted The disk drive you specified has a corrupted file structure. A format is required. Action Reformat the system disk. Refer to your Xerox 4850/4890 HighLight Color LPS Operator Guide. DS9070 Tape or cartridge not in system or offline The tape or cartridge you specified is offline or does not exist.

  • Page 19: File Conversion Utility (Fcu) Messages

    Check the syntax of the command and retry. FC6005 Task aborted, XEROX/SIMPLE palette is required. You attempted to convert an .IMG or .IM6 file. You entered an ink catalog or palette other than Xerox/Simple. The task is aborted. Action None.
  • Page 20 FC6060 Task aborted, invalid file type You entered an FCU command which does not contain an allowable file type. Action Retry the command specifying the correct file extension (.FRM, .IMG, or .LGO). XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 21 Task aborted, problem in memory allocation During the conversion, memory is unavailable, and the system cannot acquire additional memory space. Action 1. Purge unnecessary files to free up memory. 2. Retry the command. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 22 FC6160 Warning, character codes have been rearranged The character codes in a logo were rearranged during the file conversion. This message informs you of the action performed on the new logo. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 23: General Floppy Utility (Flf) Messages

    Action None. FL1010 Syntax error: invalid command You incorrectly entered a command. Action Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information. FL1015 Syntax error: invalid parameter You incorrectly entered a parameter. Action Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information.
  • Page 24 GENERAL FLOPPY UTILITY (FLF) MESSAGES FL1025 Syntax error You incorrectly entered a parameter or command. Action Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information. FL1030 Aborting duplicate process The system cannot read the floppy disk that contains the information you want to copy and automatically aborts the copying process.
  • Page 25 The system successfully wrote a series of files to the floppy disk. Action None. FL1075 Create aborting The system detected an error, and the process to write a series of files to the floppy disk failed. Action Use another floppy disk. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 26 This function not available at this login The system could not perform the command function at the current logon level. Action Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information on indicating restriction levels in the command line. FL1160...
  • Page 27 Floppy disk formatting complete The system successfully formatted the floppy disk you specified. Action None. FL1570 Sector check in progress The system is currently checking the sectors (blocks) on the floppy disk before formatting. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 28 The system cannot recognize the format in which the floppy disk was formatted. Action Perform one of the following actions: • Enter Y to format the floppy disk. • Enter N to cancel the operation. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 29 Remove the write-protection tab on the floppy disk and try the procedure again. FL2100 Format failed . . . insert a new floppy The system detected an error during the process of formatting a floppy disk. Action Use another floppy disk. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 30 You are requested to decide if you want to change the floppy disk name from its current label. Action Perform one of the following actions: • Enter Y to change the floppy disk label. • Enter N to cancel the operation. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 31 Action Perform one of the following actions: • Enter Y to erase all the files from the floppy disk. • Enter N to cancel the operation. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 32 The system was unable to read the floppy disk that contains the information you want to copy and automatically aborts the copying process. Action Make sure you are using the correct floppy disk. 5-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 33 The system detected an error in reading the files from the tape. Action Make sure the tape is mounted properly. FL6150 Illegal function code The system detected an I/O request error. Action Retry the operation. If the message recurs, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 5-11...
  • Page 34 Make sure you have the correct floppy disk in the drive. FL6159 Floppy is write protected The system detected a write-protection tab on the floppy disk. Action Remove the write-protection tab from the floppy disk. 5-12 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 35 Make sure you properly placed the floppy disk in the drive and try the process again. FL9025 User should not see this message. This message is the result of unusual software or hardware problems. Action Contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 5-13...
  • Page 36 The floppy drive is either offline or is not currently accepting I/O requests. Action Make sure the floppy drive is online and try the operation again. FL9053 Fatal hardware error The hardware is not functional. Action Contact your service representative. 5-14 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 37: Flf Messages

    You entered a DUPLICATE command at the FLF prompt. Action None. FLF: Floppy Utility Task, Version 1.0 The system is displaying the title for the floppy utility after you entered a multiple command mode. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 5-15...

  • Page 39: Forms Compilation (Fd) Messages

    FD messages may appear while forms are being compiled using the Forms Description Language (FDL). This chapter lists and describes each FD message and provides the appropriate actions to take as required. Refer to your Xerox 4850/4890 HighLight Color LPS Forms Creation Reference for additional information.
  • Page 40 The compiler will abort. Action 1. Check the FSL for the correct filename. 2. Create the FSL file on disk, if necessary. Refer to the Xerox 4850/4890 HighLight Color LPS Forms Creation Reference. 3. Retry the FDL task.
  • Page 41 The Forms Compiler will abort. Action 1. Retry the operation. If the failure was an intermittent memory error, the message does not reappear. 2. If the problem continues, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 42 The Forms Compiler will abort. Action 1. Retry the operation. If the failure was an intermittent memory error, the message does not reappear. 2. If the problem continues, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 43: Host Interface Processor (Hip) Messages

    Host Interface Processor (HIP). This chapter lists and describes each HIP message and provides the appropriate actions to take as required. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for additional information.
  • Page 44 3. If the message reappears, contact your service representative. HP0210 Transmission aborted: JOB ID number. The job being sent to the printer was aborted via the HIP ABORT command or due to a communication failure. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 45 Action Reenter the command specifying the correct job numbers. HP1160 Logging already enabled You entered a HIP LOG START command while logging is enabled. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 46 You entered the HIP ECHO START echo server command, and the echo test was started. Action None. HP1182 Echo test already running. You entered the HIP ECHO START echo server command while an echo test was already in progress. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 47 You entered the HIP ONLINE command with the XNS or XPF host selected, or you entered the HIP ONLINE ALL command with the 871 or DMR host selected. All print and nonprint operations will be accepted. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 48 Action None. HP1260 Interface busy - cannot send file(s). Your attempt to transmit a file to the DMR host was rejected because the interface was busy with another request. Action Retransmit the file. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 49 Communication with the XPS host has resumed after a printer crash. If the job being transmitted at the time of the crash can be recovered, transmission of that job will resume. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 50 HIP hosts for your system. Action None. HP1410 End of HIP diagnostic. You entered the HIP DIAGNOSTIC command with the 871 or DMR host selected and the diagnostic test completed. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 51 Due to disk space unavailability, the HIP is unable to create its buffer, job directory file, or both. The HIP is unusable in this condition. Action 1. Delete files from the system disk to provide more space. 2. Compress the system disk. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 52 Due to disk space unavailability, the HIP is unable to create its XNS log file. HIP XNS logging will not be enabled. Action 1. Delete some files to create space for the log file. 2. Compress the system disk. 7-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 53 Error in command at: ’part of command in error’. You entered part of the command incorrectly. Action Reenter the command correctly. HP2310 Reenter command. The system displays this message immediately after message HP2300. Action Reenter the command correctly. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 7-11...
  • Page 54 Reenter the command specifying the correct job. HP2345 Can not CHANGE: Output file already exists. You specified a file that is already resident on the disk. Action Reenter the HIP CHANGE command specifying a different filename. 7-12 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 55 A communications failure occurred while data was being transferred between the printer and the DMR host. HIP is attempting to reestablish communications with the host and resume operation from the point where the failure occurred. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 7-13...
  • Page 56 HIP SEND command to the DMR host was in progress. Action Contact your service representative and provide the information from the display. 7-14 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 57 1. Inspect the 871-CM display at the host referred to in the message to learn the nature of the failure. 2. Contact your service representative and provide the information from the display. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 7-15...

  • Page 59: Operating System Software (Oss) Messages

    This chapter lists and describes each OS message and provides the appropriate actions to take as required. Refer to the Xerox 4850/4890 HighLight Color LPS Product Reference and Xerox 4850 HighLight Color LPS Operator Guide, or Xerox 4890 HighLight Color LPS Operator Guide for additional information about LPS operations and related messages.
  • Page 60 *** Cluster has no current trays *** You entered a FEED cluster name command. The system is confirming that it selected the cluster and that the cluster has no feed trays currently assigned to it. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 61 Action None. OS0420 SEPARATE is ON. You entered the SEPARATE ON command. The system is switching output to a currently inactive stacker tray at the start of the next report. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 62 Simplex data pages: n. Simplex nondata pages: n. Duplex data pages: n. Duplex nondata pages: n. These messages indicate the number of pages that were spaced by the SPACE n PAGES command. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 63 Action Check the cluster and assign a valid feeder tray. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information. OS0730 Finishing exerciser utility: Successful exit.
  • Page 64 The system enabled the transfer assist blade. Action None. OS0841 BLADE IS DISABLED The system disabled the transfer assist blade. Action None. OS0845 Exiting lockout mode The system terminated the lockout diagnostic mode. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 65 The system is specifying that it will not continue to print automatically after it completes print quality adjustment. Action None. OS0856 Print quality adjustment request has been canceled The system processed your PQA command and canceled print quality adjustment. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 66 You entered a SUBSTITUTE INK command. The system responds by specifying the indicated primary color it is substituting for all primary colors (not black) in all the jobs you are running. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 67 Action Specify a value for n. OS0900 Job job-id aborted. You entered the ABORT job-id, ABORT I, or ABORT O command and the system deleted the job from the print queue. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 68: Os Level 1: Informational Messages

    Your command is ignored until the printer completes activity. Action 1. Check the printer control console for explanatory messages. 2. Wait until READY TO PRINT appears on the printer control console, then reenter the command. 9-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 69 The system has completed printing of the indicated job. Action None. OS1031 Diagnostic print job completed The system completed the diagnostic print job. Action None. OS1040 Utility exiting to print You executed a utility that requires printed output. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-11...
  • Page 70 Action None. OS1086 Activity report starting. The system has begun to process the Activity Report. Action None. OS1087 User report starting. The system has begun to process the User Report. Action None. 9-12 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 71 Action None. OS1103 FEX: Error, problem while restoring IOT memory. A serious error occurred when FEX attempted to communicate with the printer. Action Restart FEX. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-13...
  • Page 72 If authorized to do so, perform a sysgen and enter the serial number (located on a panel inside the printer) when instructions on the display ask for it. Refer to the Xerox 4850/4890 HighLight Color LPS System Programming and Administration Guide, or contact your service representative for additional assistance.
  • Page 73 You entered an online command when the system was offline. Action Place the system online to perform the desired function. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 74 Action 1. Terminate the connection with the host interface processor. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 75 Accounting disabled The system is restricting the accounting function and cannot process the ACCOUNT or REPORT command that was entered. Action Obtain the correct password and log on at the correct level. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-17...
  • Page 76 Command file not suspended. The system continues to process command file operations. Action None. OS1278 Command file terminated You entered the .EXIT command, and the system has ceased command file processing. Action None. 9-18 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 77 FEED MAIN/AUX not in effect, unable to toggle. The system is unable to switch between the main and auxiliary feeder trays. Action Check your cluster configuration and enter a new command that allows toggling. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-19...
  • Page 78 You entered the CLUSTER SET or CLUSTER SET N/R command but did not specify the collection of stocks available for the print job. Action Refer to the Xerox 4850/4890 HighLight Color LPS PDL Reference for more information. OS1297 There are no current trays in any cluster You entered the CLUSTER command but did not define any clusters.
  • Page 79 Select Queue Manager Receive mode to continue. OS1335 XPS accounting stopped: no disk space for files XPS is unable to accumulate accounting data because there is no disk space for files. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-21...
  • Page 80 Check your input and specify the correct filename. OS1354 Invalid font file format: file name. You specified a font file that has an invalid header format. Action Check your input and specify a valid header format. 9-22 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 81 You specified an invalid ink name. Action Specify a valid ink name. OS1367 Problem communicating with ICS You cannot validate your ink at this time because the system cannot communicate with ICS. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-23...
  • Page 82 You entered an alignment number for dots or lines that is not within the permitted range. Action Reenter the ALIGN command with values within the permitted range. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide. OS1391 Invalid scan or dot value.
  • Page 83 Action Retry later. OS1417 Interpress master not found; check START command The system could not access the file from the START command DISC:fname parameter and could not print the job. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-25...
  • Page 84 Page spacing stopped by beginning-of-report. You entered the SPACE -n PAGES command. The system can no longer space backward because it sensed a magnetic tape label indicating the beginning of a report. Action None. 9-26 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 85 You entered one of the following commands: MOVE n BLOCKS MOVE n FILES SPACE n PAGES SPACE n REPORTS The system cannot space or move forward over more text because no more data is input. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-27...
  • Page 86 Inappropriate disk file type specified. You entered an incorrect disk file type. Action Check the file type and reenter it correctly. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 87 OS1558 File ‘name’ replaced. Data loss. . .Enter “CONTINUE” or “ABORT” A file replaced the indicated file on the system disk. This occurs when the host sends the file in Xerox-label format. Action Enter the CONTINUE or ABORT command. OS1559 File ‘name’...
  • Page 88 Action 1. Load the necessary font file to disk. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information or contact your service representative for information on the correct font to load.
  • Page 89 System is already “OFF-LINE”. You entered the OFFLINE command while the system was offline. Action None. OS1725 System is already “on-line”. You entered the ONLINE command while the system was online. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-31...
  • Page 90 Action None. OS1760 Reel-to-reel tape unit selected. The system selected the magnetic tape drive. Action None. OS1761 Cartridge tape unit selected. The system selected the cartridge tape. Action None. 9-32 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 91 Assign a tape keyword and reenter the command. OS1769 “CARTRIDGE” keyword is currently unassigned You entered the SUB DEV command. The cartridge is currently unassigned. Action Assign a cartridge keyword and reenter the command. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-33...
  • Page 92 None. OS1807 Activity report ending. The system successfully completed printing the activity report. Action None. OS1809 Diagnostic print job aborted by source The indicated source aborted the diagnostic print job. Action None. 9-34 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 93 TPJ aborted: The system encountered a problem while processing a diagnostic print request. Action 1. For TPJ, modify the form of the diagnostic print request. 2. Resysgen the system to resolve the resource problem. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-35...
  • Page 94 Action Perform one of the following actions: • Press the Rewind button or enter the REWIND command. • Mount the job tape you want. • Send a job from the host. 9-36 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 95 Check the set delivered to the first bin and discard it if incomplete. OS1960 Print quality adjustment will cause partial set ejection The system is adjusting print quality that will cause the finishing module compiler tray to eject a partial set. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-37...
  • Page 96 PQA as current trays in a valid cluster. 2. With the dual stacker, specify different output trays for PQA and the print job. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 97 You may have entered syntax or characters incorrectly. Action 1. Verify that your values and syntax are correct and retry the command. 2. If the message reappears, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-39...
  • Page 98 No test patterns form available for specified source size The system does not have a test pattern form file available for the paper size you requested. Action Select a different paper size and retry the command, or abort the operation. 9-40 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 99: Os Level 2: Routine Maintenance Messages

    Tray 1 set for _x_mm paper. Tray 2 set for _x_ mm paper Warming up--both paper trays not set for same size--press i Action If you want to switch trays, reset the paper length guides to the same size. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-41...
  • Page 100 1. If you have not already done so, load the magnetic tape reel for the job you want to print. 2. Enter the CONTINUE I command to start inputting data from tape. 9-42 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 101 End of Volume magnetic tape label. Action 1. Load the magnetic tape reel containing the next volume of the report. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 102 2. Add paper to the main feeder tray. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for more information.
  • Page 103 Empty the tray and restart the job. OS2220 Bin 2 is full. The specified bin is full. Action 1. Empty the bin or send the output to another bin. 2. Press <CON> to resume printing. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-45...
  • Page 104 The specified cluster contains paper that is smaller than that specified by the print job. Action Perform one of these steps: • Change the paper in the specified cluster to match the specifications of the job. • Change the FEED command. 9-46 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 105 1. Change SELECT to AUTO or E to enable the Bypass Transport as the destination. 2. Press <CON> to override the data stream destination and send the paper to the selected destination. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-47...
  • Page 106 “S” to reprint the entire set A jam occurred while the system was printing a report. SRECOVERY=ASK was in effect. Action Perform one of the actions stated in the message. 9-48 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 107 Action Release the feeder belt and check both feeder trays. Remove any misfed paper. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for specific procedures.
  • Page 108 If condition persists, call for service. The dry ink bottle is empty. Action 1. Replace the dry ink cartridge. Refer to the Xerox 4850/4890 HighLight Color LPS Operator Guide for the specific procedure. 2. If print quality does not improve, contact your service representative.
  • Page 109 The dry ink waste container is full. Action Replace the container and resume printing. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for specific procedures. OS2552 Dry ink waste container not present There is no dry ink waste container in place.
  • Page 110 Out of fuser lubricant. Add two tubes of fuser lubricant There is no fuser lubricant remaining. Action Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for specific procedures.
  • Page 111 Action Remove the tape and mount the volume that is next in numerical order. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for specific procedures.
  • Page 112 Action Perform one of the following actions: • Enter the PQA START command to begin the print quality adjustment. • Enter the SUBSTITUTE INK command. • Abort the report or job. 9-54 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 113 You requested ink substitution, but it is not allowed by the job. Action None. OS2677 No ink substitutions are in effect This message appears after a successful print quality adjustment when no ink substitutions are currently in effect. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-55...
  • Page 114 Action 1. Make sure the stock you want to use for the print quality adjustment (PQA) is loaded in the paper tray. 2. Make sure the target PQA output tray is empty. 9-56 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 115 You entered a command the system does not recognize, or you incorrectly entered a command. Action Reenter the command correctly. If the message reappears, you cannot use the command with your system. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-57...
  • Page 116 Action Use the appropriate HIP command to communicate with the Ethernet. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference to locate the correct HIP commands. OS2714 Unable to obtain status at this time. Retry.
  • Page 117 The system cannot process the command you entered while it is in job interrupt mode. Action Retry the command later. OS2736 Command valid only in job interrupt mode The command you entered is only valid in job interrupt mode. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-59...
  • Page 118 Command not supported on this configuration Your configuration does not support the command you entered. Action 1. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference to locate the correct command. 2. If you cannot locate the information, contact your service representative.
  • Page 119 Do a RESET before retrying operation. You must reset the system before it can process the command you entered. Action 1. Press the Reset button or enter the RESET command. 2. Retry the operation. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-61...
  • Page 120 Disk saturated. INPUT is waiting for disk space. The print file is full. The system slows input to allow data to print and create more space on the system disk. Action None. 9-62 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 121 The system aborts the job. Action 1. Enter the JDE or DJDE command calling for a number of forms and fonts with the range established at installation. 2. Restart the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-63...
  • Page 122 OS2920 FEX Error, FEXDMP.JDL not found. Recompile FEX.JSL FEX cannot find the file you requested on the system disk. Action 1. Recompile the FEX.JSL. 2. Reenter the FEX command. 9-64 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 123 Higher logon needed while job queue not empty. Your logon level was not sufficient to run the job. Action Obtain the appropriate password and log on at the appropriate level for the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-65...

  • Page 124: Os Level 3: Printer Problem Messages

    2. Pull out feed tray 1, then push it all the way back in. 3. If the tray does not rise, enter the FEED 2 command to switch to another tray to complete the job. 4. If the problem continues, contact your service representative. 9-66 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 125 Note: This message may also appear after an abnormal termination of the previous job. Action Check the trays for an unusable one-sided page and discard it. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-67...
  • Page 126 Perform one of the following actions: • Wait for the fuser to reheat (the warm-up light on the system controller turns off). • Wait until the message, Ready to print, appears on the printer control console display. 9-68 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 127 3. Contact your service representative. OS3040 Output offset failure. Set will not be offset A stitcher/stacker fault occurred. Action Check output for proper job separations (two jobs may be combined). XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-69...
  • Page 128 1. Check the output. 2. Press <CON> to resume printing. OS3711 Report integrity problem. Check output The integrity of the current report in the output stacker collection area is questionable. Action Visually inspect the report. 9-70 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 129: Os Level 4: System Or Tape Problem Messages

    1. Enter the ABORT I command to cancel the job. 2. Clean the magnetic tape drive to make sure the read was accurate. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for the specific procedure.
  • Page 130 Action 1. Clean the magnetic tape drive to make sure the read was accurate. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for the specific procedure.
  • Page 131 • Enter the ABORT I command and clean the tape drive. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for the specific procedure. •...
  • Page 132 Follow the recovery instructions as they appear on the printer control console display. OS4820 Power interruption . . . A power failure occurred, or the system was inadvertently turned off. Action Reboot the system when power is restored. 9-74 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 133: Os Level 6: Job Integrity Problem Messages

    Invalid Ethernet tape preamble format. Information in the Ethernet tape header (preamble) is missing or incorrectly formatted. The job will not print. Action Recreate the job tape. Make sure the data is formatted correctly. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-75...
  • Page 134 The Ethernet tape has apparent data loss. The job will not print. Action Check the tape at the host to determine where the problem exists. Recreate the tape, making sure the data is complete. 9-76 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 135 1. Enter the ABORT job command to cancel the job. Clean the magnetic tape drive to make sure the read process was not impaired. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide for the specific procedure.
  • Page 136 — Press <CON> to resume printing. The RTEXT message will not print. — Enter the ABORT job command to cancel the job. 2. Recode the RTEXT statement correctly. 3. Restart the job. 9-78 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 137 Too many graphics for page. More than 16 graphics have been specified for the page. The system aborts the job. Action Recreate the job, reducing the number of graphics on the page. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-79...
  • Page 138 — Press <CON> to resume printing if data loss is acceptable. — Enter the ABORT job command to cancel the job. 2. Recode the JDE to match the tape label block count. 3. Restart the job. 9-80 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 139 <CON> until the job prints. Refer to the actions provided for messages OS6010 through OS6090. If it appears alone, perform these actions: 1. Enter the SPACE 1 REPORTS command to go to the next report. 2. Recreate and rerun the lost report. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-81...
  • Page 140 The inks in the current ILIST ink lists are referenced by index values in the range 1 to n. Action Specify a value within the range indicated in the message. 9-82 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 141 Successive page recovery stopped by end of report. Job recovery was initiated after a software failure. Page-by-page data recovery has reached the end of the report and stopped. The system aborts the report. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-83...
  • Page 142 The system aborted the current report due to a paper size mismatch. Action None. OS6700 Syntax error in DJDE. A wrong format or word was used in coding a DJDE record. Action 1. Recode the DJDE correctly. 2. Restart the job. 9-84 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 143 — Enter the CONTINUE I command to process the job. The DJDE is ignored. — Enter the ABORT I command to cancel the job. 2. Recode the DJDE to reference a different JDE. 3. Restart the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-85...
  • Page 144 Perform one of the following: • Upgrade the software on your printer to accommodate five- word FSTs. • Recode the print job to reference four-word FSTs, and load the FSTs onto the printer. 9-86 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 145 The DJDE specified a PDE calling for forms, fonts, or both, which was in excess of the system maximum. Action 1. Recode the DJDE, specifying fewer fonts and forms as necessary. 2. Restart the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-87...
  • Page 146 OS6729 DJDE processing error: FEED used but no STOCKSET in effect. The FEED command was used, but a STOCKSET statement is not in effect. Action Reenter the DJDE command, specifying a SET. 9-88 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 147 .OSD, .SAF, .SYS, .$Y$, or .TSK. The system does not copy the specified file to disk. Action 1. Recode the DJDE, making sure you specify the correct file type extension. 2. Resend the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-89...
  • Page 148 Not enough dynamic memory was available to process linked word processing files. The system processes the files up to the point where memory was exhausted. Action Resend the files the system did not process. 9-90 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 149 Improper file format. Record size is not 80 bytes. The application specified an ink list resident on the disk, but when the file is accessed, it is found to be the wrong format. Action Check the application. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-91...
  • Page 150 Use the FSL command, LOGO, to include the INK option, which allows you to specify the ink you want for the logo. You can obtain a two-color format logo from the Xerox Font Center or Rank Xerox for this purpose.
  • Page 151 The job reverted to 1 to n processing. Action If you reversed the collation of the stock for the n to 1 job, recollate it for 1 to n processing. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-93...
  • Page 152 — Recode the DJDE, changing the number of graphic callouts. — At the host, change the program that writes images to shared disk, reducing the number of graphics. 2. Restart the job. 9-94 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 153 PDE. The system does not print the page numbers. Action 1. Recode the PDE or create a new one to include the font you want to use for page numbering. 2. Restart the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-95...

  • Page 154: Os Level 7: System Problem Messages

    The system cannot read the printer carriage control (PCC) or translate the table statement because it is incorrectly formatted. The system aborts the job. Action 1. Reenter the statement correctly in the JDL. 2. Restart the job. 9-96 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 155 A software failure caused a system rollover. The system cannot begin automatic job recovery because insufficient dynamic memory remains for it. The system aborts the job. Action 1. Restart the job. 2. If the problem continues, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-97...
  • Page 156 Multiple BEGINS in PDE not supported - job aborted The system cannot complete the multiple begins specified in the PDE. The system aborts the job. Action 1. Recode the PDE. 2. Restart the job. 9-98 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 157 1. Check the form and recompile it if you find an error. 2. Rerun the job to determine if the failure is an intermittent CPU memory failure. 3. If the problem continues, recreate the job, reducing the RTEXT parameters. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-99...
  • Page 158 The combined memory required for form, variable data, and font specification tables exceeds the available memory in the output area. The system aborts the job. Action 1. Recreate the job, reducing the forms, fonts, or variable data. 2. Restart the job. 9-100 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 159: Os Level 8: Probable Severe Software Errors

    JDE used to process the file was incorrect. Action Perform one of the following actions: • Enter the correct JDE and restart the job. • Recreate the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-101...
  • Page 160 A task message control block (information sent from one task to another) was sent to the wrong task. Action 1. Enter the RESET command. 2. Retry the job. 3. If the problem continues, contact your service representative. 9-102 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 161 1. Restart the job. This message should not reappear if the failure was an intermittent CPU memory failure or software error. 2. If the problem continues, save the tape or data. Then contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-103...
  • Page 162 OS8700 Incorrect version of accounting file The account file is corrupt or outdated. Action Contact your service representative to obtain the correct software for the accounting file. 9-104 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 163 CPU. The system aborts the job. Action 1. Recompile the form with the correct file header. 2. Reload the form file to the system disk. 3. Restart the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-105...
  • Page 164 3. If the message reappears, reboot the system by pressing the Boot button and entering B. 4. If the problem continues, resysgen the disk if you are authorized to do so. If you are not, contact your service representative. 9-106 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 165: Os Level 9: Probable Severe Hardware Errors

    OS level 9 messages indicate a severe problem may exist with your hardware and advise you of necessary actions to take. OS9050 Unexpected error detected by RIP enter: A RIP error occurred. Action Enter the CONTINUE or ABORT command as appropriate. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-107...
  • Page 166 B. Restore the file through a resysgen if you are authorized to do so, or contact your service representative. C. Resend the job. D. Contact your service representative to log the bad sector and delete the file you named BADnnn.TMP. 9-108 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 167 The message does not reappear if the failure was an intermittent error. However, the failure may recur or new failures may occur when trying to resume the job. • Enter the ABORT job-id command to cancel the job. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-109...
  • Page 168 — Enter the CONTINUE O command. The job will print with one page missing. — Enter the ABORT O command to cancel the job. 2. Recreate the job and reduce the amount of data per page. 9-110 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 169 3. If the problem continues, contact your service representative. OS9369 NVM failed to clear The system cannot clear and reset the nonvolatile memory (NVM). The NVM is used by the service representative for error accountability. Action Contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-111...
  • Page 170 1. Restart the job. 2. If the problem recurs, contact your service representative. OS9420 Disk error - INPUT. The system detected a system disk error during the input task process. Action Contact your service representative. 9-112 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 171 Action 1. Press the Boot button and enter B to reboot the system. 2. Enter the ONLINE command. 3. Enter the OFFLINE command. 4. If the problem recurs, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-113...
  • Page 172 An error occurred in the online interface as the system was going online in response to power-up. Action 1. Repeat the power-up sequence. Refer to the Xerox 4850/4890 HighLight Color LPS Operator Guide for more information. 2. If the problem recurs, contact your service representative.
  • Page 173 1. Press the Boot button and enter B to reboot the system. 2. If the message reappears, apply resysgen if authorized to do 3. If the problem recurs, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 9-115...
  • Page 174 The system detected a hardware problem that prevents further operation of the system. Action 1. Press the Boot button and enter B to reboot the system. 2. If the problem recurs, contact your service representative 9-116 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 175: Job Source Library Compilation (Pdl) Messages

    Level 7-system problems Level 8-software errors Level 9-hardware errors. Note: For instructions on compiling JSLs and a list of PDL commands, refer to your Xerox 4850/4890 HighLight Color LPS Print Description Language. PD0100 NOREPLACE specified A JDL object file that already exists was recompiled with a NOREPLACE option.
  • Page 176 PD2740 JSL not found. Check and retry. You entered the JSL id incorrectly. Action Perform one of the following actions: • Reenter the JSL identification correctly. • Enter a different JSL identification. 10-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 177 PDL internal error -- tape I/O The system is unable to read a magnetic tape block. Action 1. Clean the magnetic tape drive. Refer to the Xerox 4850 HighLight Color LPS Operator Guide or to the Xerox 4890 HighLight Color LPS Operator Guide.
  • Page 178 Action 1. Press the Boot button and enter B to reboot the system. 2. Recompile the JDL. 3. If the message reappears, contact your service representative. 10-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 179 The requested output file cannot be opened. Action Perform one of the following actions: • Verify the output filename and reenter the command. • If the message reappears, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 10-5...
  • Page 181 PURGE (PG) command messages These messages may appear during the process of purging the disk or print file. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for more information about the PURGE command. PG0100 Processing the entire disk You entered the PURGE D command.

  • Page 182: Purge (Pg) Command Messages

    You entered a PURGE command while purge was already in progress. The command is ignored. Action None. PG1800 Purge processor aborting You entered the ABORT command, and the purge process is being terminated. Action None. 11-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 183: Printer Subsystem Controller (Psc) Command Messages

    (PSC) command messages The printer subsystem controller (PSC) command allows you to selectively download printer controller and Raster Input Processor (RIP) software. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for more information on the PSC command. PS1060 Initializing printer The printer is being processed and set at its starting values.
  • Page 184 ..Downloading failed; Device not available The RIP board requested is unavailable for use. Contact your service representative..Warning: Software/Hardware mismatch The software is not compatible with the existing hardware. Contact your service representative. Action None. 12-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 185 Action None. PS1085 Downloading HP-SCSI B firmware version number The enhanced SCSI firmware is downloaded. The number indicates the current version of the firmware. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 12-3...
  • Page 186 Action Contact your service representative. PS9000 Printer failure. Enter ’PROBLEM’ A printer failure occurred. Action Enter the PROBLEM command and respond to the messages appearing on the display as appropriate. 12-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 187 Action 1. Enter the PSC AIP command to download again. 2. If the message reappears, perform a sysgen or DSR restore. 3. If the problem persists, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 12-5...
  • Page 188 The system detected an incorrect header in the CRIBOS.SYS file. Action 1. Enter the PSC CRIB command. 2. If the message reappears, perform a sysgen or DSR restore. 3. If the problem persists, contact your service representative. 12-6 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 189 1. If the message reappears, perform a sysgen or DSR restore. 2. If the problem persists, contact your service representative. PS9031 SCSI device not installed in system. The system could not find the enhanced SCSI controller. Action Contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 12-7...
  • Page 190 Contact your service representative. PS9962 Operating in degraded mode; RIP option not available All RIP boards in the system are nonfunctional as a result of download failure. Action Contact your service representative. 12-8 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 191 Missing Bitmap memory The system encountered a bad bank or cannot access bitmap memory. Action 1. Enter the PSC AIP command to download again. 2. If the problem persists, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 12-9...
  • Page 192 1. Perform a sysgen and update the system configuration. 2. If the problem persists, contact your service representative. PS9995 SYSTEM NOT OPERATIONAL The system cannot print due to the severity of errors that occurred. Action Contact your service representative. 12-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 193: Queue Management (Qm) Messages

    Queue Manager. This chapter lists and describes each QM message and provides the appropriate actions to take as required. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information on system commands.
  • Page 194 You entered the ABORT job id or CANCEL job id command. This message may also appear when you enter the ABORT I or O command, or the CANCEL I or O command, depending on the timing of your command entry. Action None. 13-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 195 Only QUEUED or HELD entries can be moved You have attempted to move an entry that cannot be moved. Entries must be in a QUEUED or HELD state to be moved. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 13-3...
  • Page 196 Action None. QM1070 A queue of n entries successfully created. You entered the INITIALIZE QUEUE command, and the system has successfully created a queue with the indicated capacity. Action None. 13-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 197 Action None. QM1080 Queue Display mode is CLASSIC You entered the SET QUEUE DISPLAY CLASSIC command. The system is confirming the CLASSIC option for the JOBS display. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 13-5...
  • Page 198 The system uses the first entry you specified in the MOVE TOP or MOVE BOTTOM command as the destination entry. Action 1. Verify the job entry numbers. 2. Reenter the MOVE command using the correct queue entry number. 13-6 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 199 Perform one of the following actions: • Delete files from the disk or run COMPRESS to make more space available for the queue database files. • Enter the INITIALIZE QUEUE command, specifying a smaller number of entries. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 13-7...
  • Page 200 Perform one of the following actions: • Delete files from the disk or run COMPRESS to make more space available for the queue database files. • Enter the INITIALIZE QUEUE command specifying a smaller number of entries. 13-8 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 201 B. Enter COPY TAPE WRITE LABEL filename.filetype or FLOPPY SAVE filename.TMP to write to tape the file you created in step A. Enter FLOPPY SAVE filename.TMP to write to floppy disk the file you created in step A. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 13-9...
  • Page 202 Restart the system and resubmit the job. QM9010 Insufficient space to create the queue. The system does not have enough space to create a queue of 200 entries. Action Check your space requirements to allow for database creation. 13-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 203: Scale Command Messages

    SCALE command messages The SCALE command enables scanned graphic images (fonts, forms, and logos) to print at an enlarged or reduced size under certain conditions. Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for information on using commands.
  • Page 204 Enter NO if you want to cancel the command. **File name cannot be scaled (unknown error)** The requested file cannot be scaled due to an unknown error. Action Contact your service representative. 14-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 205 The requested font file cannot be scaled due to problems with byte escapement. Action 1. If you are not using an Interpress font, add switch A (assign escapement) to the SCALE command line. 2. If the message reappears, contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 14-3...
  • Page 206 FN6 or LG6 directory. Action Perform one of the following actions: • Copy the 600 spi font or logo onto the system and reenter. • Use the SCALE command to create the 600 spi version. 14-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 207 SCALE command. Action Contact your service representative. **Restoring previous file name due to errors** Due to errors already displayed, the previous file is being restored. Action Verify and reenter the desired command. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 14-5...
  • Page 208 Action None. Scaling object descriptor number: text The requested object of the packed form is being scaled. Action None. Scaling TL/DL buffers: The body of the form is being scaled. Action None. 14-6 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 209 None. Scaling TL/DL for object number: text The identified text line or display is being scaled. Action None. Scaling TL number: number The text line number indicated is being scaled. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 14-7...

  • Page 211: Status File Creation Utility (Sfc) Command Messages

    Choose a unique filename and try again. • Allow SFC to continue, overwriting the old file. QUE.SYS copied successfully The system successfully copied the QUE.SYS file to the specified file. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 15-1...
  • Page 212 Action Put a valid AS2MSG.SYS file on the system and run SFC. SFC exiting normally . . . Informs you that the system successfully terminated SFC. Action None. 15-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 213 Unable to write to output file The buffer that contains the data from the QUE.SYS file could not write to the targeted file. The problem is established with the drive. Action Contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 15-3...

  • Page 215: Status File Services (Sfs) Command Messages

    The system was unable to complete the SFS task because the status file is missing or inaccessible. Action Initiate the SFC command to run SFC. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information on the SFC command.
  • Page 216 You entered an SFS command, but the status file was already cleared and no new file was created. Action Initiate the SFC command to run SFC. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information on the SFC command.
  • Page 217 The system will use a default value of one. The letter W specifies a warning, and the system will modify the entry and compile the form. Action Recompile the form using a value from one to four. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 16-3...
  • Page 218 Action If the status file does not exist, initiate the SFC command to run SFC. Refer to the Xerox 4850/4890 HighLight Color LPS Command Reference for more information on the SFC command. Otherwise, check your requested entry and correct it.

  • Page 219: System Verification Error Messages

    MAIN MEMORY MISSING; BANK(S) n This message appears if any memory specified during the system configuration phase is either not present or has data loss. Banks are displayed in 16KB sections. Action Contact your service representative. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 17-1...
  • Page 220 128K is missing, or if there is no font memory available. If this message is displayed, the system will be unable to function even in a degraded mode. Other messages follow describing the specific error. Action Contact your service representative. 17-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 221: Interpress (Ip) Error Messages

    Within each level, the messages are listed alphabetically. Informational messages may follow error messages and are listed alphabetically under a separate heading. For more information about Interpress, refer to your Xerox 4850 HighLight Color LPS Operator Guide or to your Xerox 4890 HighLight Color LPS Operator Guide.

  • Page 222: Appearance Error Messages

    Curved lines are available only when selecting the Raster Image Processor (RIP) option. Action None. Feature requires RIP option; diagonal lines. You can only draw diagonal lines when you select the Raster Image Processor (RIP) option. Action None. 18-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 223 Multiple forms per page were requested, and the LPS does not have the Raster Image Processor (RIP) option. Action 1. Merge the multiple forms into a single FSL. 2. Reference the new form file in the document. 3. Resend the document. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-3...

  • Page 224: Appearance Warning Messages

    Appearance Warning: Appearance Warning (page n): The text following the colon differs, depending on the type of warning the system encounters. The varying portions of the warning messages follow in alphabetical order. 18-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 225: Appearance Warning:

    Action None. Document generated message = “error string.” The document requested that an error be added to the summary. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-5...
  • Page 226 INTERPRESS (IP) ERROR MESSAGES Invalid packed pixel array data. During the decompression of a Xerox/Packed pixel array, the format of the pixel array is determined to be invalid. Action None. Feature not implemented: printing instruction name. The printing instruction name is not supported.

  • Page 227: Fatal Error Messages

    1 and 31 characters inclusive. The job account name taken from the document exceeded the length of the allowable range. Action Reduce the size of the job account name and resend the document XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-7...

  • Page 228: Fatal Error (Page N):

    When reading an image from Raster Image Processor (RIP), a full system disk condition occurred. Note: In this message, the letter B indicates an octal value. Action Purge unnecessary files from the LPS and compress the system disks to free contiguous space. 18-8 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 229 The compressed (IMG) data for the page exceeded the amount of memory available in the GVG option. Action None. No resources; insufficient dynamic memory. Virtual memory space was exhausted during Interpress master processing, and the job was aborted. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-9...
  • Page 230 RIP will no longer be used. Action 1. Download the RIP software with the PSC RIP command. 2. Resend the document. 3. If the problem continues, contact your service representative. 18-10 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 231: Informational Messages

    This message identifies invalid character references in an LPS font. The substitute character appears in place of the invalid character. Note: In this message, the letter B indicates an octal value. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-11...
  • Page 232 Error sheet only; document not printed due to errors. This message is added to the actual error message if no data was formatted for printing when the job was aborted due to errors. Action None. 18-12 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 233 The desired point size was not satisfied, and the next smaller (or next larger if there is no next smaller) point size is substituted. This message follows the font problem message. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-13...

  • Page 234: Master Error Messages

    Action 1. Rename the file to a well-known name (such as BADBKn.SYS). 2. Recopy the file to the LPS. 3. Resend the document. 18-14 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 235 When processing a form, a font or logo that is not available on the LPS was found. Action 1. Load the font or logo on the printer. 2. Modify the form appropriately. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-15...
  • Page 236 None. Imaging requirements beyond Publication Set for operator: operator name. An object in the document is not imaged because it requires the professional graphics level of Interpress for correct rendering. Action None. 18-16 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 237 Action None. Master not well-formed; bad document header. The Interpress header, “Interpress/Xerox/n.0...” was not found in a file that required one. The file is either the Interpress master or a SIF. A SIF problem is preceded by the message, Master Warning (page n): Problem with insert file: “file type filename.”...
  • Page 238 The Interpress master has a CORRECT body before the current body is complete. Action None. Parse Failure; invalid parsing continued after end of COMPOSED operator. An internal error in processing a composed operator was found. Action Contact your service representative. 18-18 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 239 A SIF requested a file folder (type) that is not accessible from an Interpress master. The valid folders are FRM, IMG, IPF, LGO, LIB, MSC, and XCS. Action 1. Modify the document to request a supported file type. 2. Resend the document. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-19...
  • Page 240 Action None. Zero divide attempted. A zero divisor was found in the master or was due to loss of precision. Action None. 18-20 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 241: Master Warning Messages

    The varying portions of the error messages follow in alphabetical order. No resources; page too complicated to print. The maximum number of characters per page (approximately 40,000) was reached. Action None. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-21...

  • Page 242: System Problem Messages

    An error was detected in the version identifier of the accounting file while logging the accounting information. Action None. Logical disk address error during Account Initialization. A problem processing the accounting information was found. Action None. 18-22 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 243: System Problem (Page N):

    “SYS>IPFNTS” missing; recompile “JSL>IPFNTS.” Font Interchange Standard (FIS) families were not loaded on the system disk, or IPFNTS.JSL was not compiled. Action Compile IPFNTS, IFU IPFNTS, or enter the IFU ADD command. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 18-23...
  • Page 244 Action 1. Rename IPFNTS.SYS to a well-known name, such as BADBKn.SYS. 2. Recompile IPFNTS by entering the IFU IPFNTS command. 18-24 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...

  • Page 245: Finishing Configuration (Fcg) Messages

    The FCG usage message displays a list of the available FCG commands and their syntax. This is an informational message. Refer to the Xerox 4850/4890 HighLight Color Laser Printing System Command Reference for more information about the commands and their syntax.
  • Page 246 The input profile label is missing from the FCG.LIB file. Action Add an input profile label to the FCG.LIB file. Refer to the Xerox 4850/4890 HighLight Color LPS System Programming and Administration Guide for more information about the format of the FCG.LIB file.
  • Page 247 Verify the input profile in the FCG.LIB file and change it, if necessary. Then use the FCG task to reload the profile. Refer to the Xerox 4850/4890 HighLight Color LPS System Programming and Administration Guide for more information about the format of the FCG.LIB file.

  • Page 249: Hardcopy Graphics Printing (Pr) Command Messages

    (PR) command messages The following messages may appear during the HARDCOPY process (printing copy of graphic .IMG files with comprehensive descriptor page). Refer to your Xerox 4850/4890 HighLight Color LPS Command Reference for more information on the HARDCOPY command. PR1000 All files hardcopied, HARDCOPY exiting You entered the HARDCOPY command.
  • Page 250 No files were found containing filename characters entered in the “mask“ option of the HARDCOPY command. Action 1. Recheck and correct “mask“ characters. (Refer to your 4850/4890 HighLight Color LPS Command Reference for additional information.) 2. Reenter the command. 20-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 251 The system is unable to initiate job recovery after a software failure because a hardware error makes the recovery file inaccessible. Action 1. Restart the job. 2. If the message reappears, contact your system specialist or Xerox Customer Service. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 20-3...
  • Page 253 SDI option messages The Xerox Shared Disk Interface (SDI) option messages are defined in the Xerox Shared Disk Interface (SDI) option Operations Guide. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE 21-1...
  • Page 255 Host Interface Processor HIP command and process message prefix characters IFU command message prefix characters Interpress font utility Image Generator version n Interpress Decomposer IPFNTS Interpress fonts XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE A–1...
  • Page 256 SFS command message prefix characters status file services spots per inch Vertical Forms Unit Xerox Communication Source XPAF Xerox Print Access Facility XPMF Xerox Print Management Facility XPRM Xerox Print Resources Manager A–2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 257 128 possible characters. It is a common standard for information interchange among data processing systems, data communication systems, and associated equipment. International paper size measuring 250 mm by 353 mm or 9.84 by 13.9 inches. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-1...
  • Page 258 Bottom of form. boot To load the initial instructions of a program into memory. These instructions direct the loading of the operating system and application software. Beginning of tape. GLOSSARY-2 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 259 CCID Character code identifier. Code associated with the universal identifier “Xerox” to indicate the version of the Xerox character code standard used to code Interpress strings. Customer Changeable Unit. The color housing that fits inside the printer.
  • Page 260 Software that translates instructions written in high-level language into machine language for execution by a system. composite character Character that has multiple bitmap references combined into one and stored on disk in font memory. GLOSSARY-4 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 261 The tone (defined in the ink catalog file and reproduced for your reference on the printed samples of 4890 HighLight Color LPS palettes) as it is applied to the page. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-5...
  • Page 262 2. In printing, duplex means printing on both sides of the paper. dynamic Job descriptor entry See DJDE. EBCDIC Extended binary coded decimal interchange code. Coded character set consisting of up to 256 8-bit coded characters. GLOSSARY-6 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 263 Lateral positioning of characters or font families. Ethernet Xerox developed local area network (LAN) that allows transmission of data by cable from one device to another. A modified version of the Ethernet specification has been approved as IEEE standard 802.3.
  • Page 264 Line preceding the message text in a formatted message display. form feed Keyboard and printer control character that causes the printer to skip to the top of the next page. forms control buffer See FCB. GLOSSARY-8 XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE...
  • Page 265 Physical components (mechanical, magnetic, electronic, and so on) of a system, as opposed to programs, procedures, rules, and associated documentation. The hardware is operated by software and firmware. High-capacity feeder. HCSS High-capacity stitcher/stacker; also referred to as stitcher/stacker. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-9...
  • Page 266 GLOSSARY hexadecimal Numbering system with a base of 16. The numbers 10 through 15 are represented by A through F. HFDL Host forms description language. hierarchy Relative priority assigned to arithmetic or logical operations that must be performed. high-level language Programming language consisting of words and symbols that are close to normal English and, also readily understandable by the user.
  • Page 267 The device that connects two systems to allow them to communicate. Interpress Industry-standard page description language developed by Xerox. Interpress documents can be printed on any sufficiently powerful printer equipped with Interpress print software. Interpress font utility (IFU) Utility for managing fonts.
  • Page 268 In Xerox printing systems, a logical page is a formatted page that is smaller than the physical page. A logical page is defined by an origin, thus allowing more than one logical page to be placed on a physical page.
  • Page 269 Device that converts digital information into an analog signal suitable for sending over analog telecommunication lines. Also converts an analog signal from telecommunication lines into digital information. monochrome Printing in one color only. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-13...
  • Page 270 GLOSSARY nesting Subroutine or set of data, such as a comment, contained sequentially within another set of data. network System of hardware and software that manages communication and sharing of common resources (such as printers) between computers and terminals for multiple users at once. node Station, terminal or computer operating in a network environment.
  • Page 271 In Xerox laser printing systems, a unit of measurement equal to 0.0139 inch. Points are always used to express type, size, and leading. There are 12 points to a pica and about 72 points to an inch.
  • Page 272 Orientation in which text and images are positioned parallel to the short edge of the paper. PostScript Proprietary page definition language, compatible with the Xerox 4890 Highlight Color LPS when a front-end conversion utility is installed. Pages per minute.
  • Page 273 A printing industry standard color definition model where all colors are defined in terms of values for the three additive primary colors: red, green and blue. Refer to color definition model. Solid-state memory for programs. It cannot be rewritten. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-17...
  • Page 274 GLOSSARY rendered character Character whose bitmap is a combination of other bitmaps positioned relative to each other, such as accented characters and single characters consisting of two or more characters. A rendered character does not require additional disk space or font memory.
  • Page 275 The name of a cluster as defined by a system command. stock reference An application specific pseudonym for a cluster. stockset Collection of stocks to be used on a print job. See also stock. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-19...
  • Page 276 Device which shares a common purpose and close association with other devices. This term is used to identify the Xerox print software which resides in the Digital host system as part of the XPMF-VMS communications link.
  • Page 277 If TXC detects a condition that may affect print quality, TXC requests that the operator initiate Print Quality Adjustment (PQA) to adjust the xerographic subsystem. Refer to print quality adjustment. Tracks per inch. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-21...
  • Page 278 GLOSSARY transaction processing Method of data processing that updates files and results are generated immediately after data entry. translation 1. In data communications, the conversion of one code to another on a character-by-character basis. 2. In programming, the function of a language processor that converts a source program from one programming language to another.
  • Page 279 A function of the operating system software (OSS) that controls the xerographic mode of the 4890 HighLight Color LPS. The operator or programmer controls XMS through the xerographic mode persistence (XMP) setting. Refer to xerographic mode. XICS Xerox Integrated Composition System. XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE GLOSSARY-23...
  • Page 280 Xerox Printer Access Facility. XPPI Xerox Pen Plotter Interface. Xerox Print Service (XPS) Manager is a printer front end to other (Xerox Print Service) hosts. XPS Manager server communicates with the printer via a layered communication protocol, based on the XNS protocol suite but enhanced with “online“...

This manual is also suitable for:

4890 highlight color

Table of Contents