Table of Contents
Advertisement
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
OS0850
Print quality adjustment is pending
You entered a valid PQA command. This message usually
accompanies other related messages.
Action
Enter the CONTINUE command or press <CON> to initiate
PQA.
OS0851
Paper tray: n ---PLEX STOP before printing
The system is identifying the paper tray numbers used in the
current PQA operation. Either simplex or duplex is indicated by
---PLEX. This message may accompany other related messages.
Action
None.
OS0852
Cluster: name ---PLEX STOP before printing
The system is identifying the cluster name used in the current
PQA operation. Either simplex or duplex is indicated by ---PLEX.
This message may accompany other related messages.
Action
None.
OS0853
Mode: n HOUSING, -plex
The system is identifying the housing it is adjusting, and whether
simplex or duplex is specified for a current PQA operation. This
message may accompany other related messages.
Action
None.
OS0854
After Print Quality Adjustment: CONTINUE printing
automatically
The system is specifying that it will continue to print
automatically after it completes print quality adjustment.
Action
None.
OS0855
After Print Quality Adjustment: STOP before printing
The system is specifying that it will not continue to print
automatically after it completes print quality adjustment.
Action
None.
OS0856
Print quality adjustment request has been canceled
The system processed your PQA command and canceled print
quality adjustment.
Action
None.
OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
9-7
Advertisement
Table of Contents
