Loading Software Updates
4.5 Bootcode Update via TFTP
In some cases, a boot code update is necessary. Perform a bootcode update
when the service desk requests.
4.5.1
Updating the Bootcode file
For a tftp update, you need a tftp server to store the bootcode.
The URL identifies the path to the bootcode stored on the tftp server. The
URL is in the format
tftp://IP address of the tftp server/path name/file name
(for example: ).tftp://192.168.1.1/device/device_bootrom.img
Open the
In the "tftp Software Update" frame, click the "Bootcode" radio
button.
Enter the path to the bootcode bin file in the "URL" text box.
To start the update, click "Update".
To start the new bootcode after loading, open the
Settings:Restart
Note: You need read-write access for this dialog.
enable
configure
copy <url> system:bootcode
76
Basic Settings:Software
dialog and click "Cold start...".
4.5 Bootcode Update via TFTP
dialog.
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Copy the bootcode bin file from the tftp server to
the device.
Basic
UM BasicConfig L2E
Release 8.0 05/2013