EtherNet/IP
2 EtherNet/IP
EtherNet/IP, which is accepted worldwide, is an industrial communication
protocol standardized by ODVA (Open DeviceNet Vendor Association) on
the basis of Ethernet. It is based on the widely used transport protocols TCP/
IP and UDP/IP (standard). EtherNet/IP thus provides a wide basis, supported
by leading manufacturers, for effective data communication in the industry
sector.
EtherNet/IP adds the industry protocol CIP (Common Industrial Protocol) to
the Ethernet as an application level for automation applications. Ethernet is
thus ideally suited to the industrial control technology sector.
UDP/IP Unicast
UDP/IP Unicast/Multicast
EtherNet/IP-Stack
Controller
Figure 2: Communication between the Controller (PLC) and the Switch
In particular, you will find EtherNet/IP in the USA and in conjunction with
Rockwell controllers.
For detailed information on EtherNet/IP, see the Internet site of ODVA at
www.ethernetip.de.
Industrial Protocols
13
Release 5.0 04/09