Switching Global - Hirschmann Power MICE Reference Manual

Switching

5.1 Switching Global

This dialog is used to
display the MAC address of the device
enter the aging time for all dynamic entries in the range from 10 to 630 s
(unit: 1 s; default setting: 30 s).
In connection with the router redundancy (see MACH 3000), select a time
greater than/equal to 30 seconds.
enable/disable the flow control
enable/disable the address learning
set the maximum packet size (frame size).
Select "1552" if you want the device to transmit packets with double tag-
ging. You can thus operate the device in networks with MPLS Switches/
routers, for example.
Figure 27: Switching Global
70
5.1 Switching Global
RM Web L3P
Release 4.1 03/08