Recording Files; Cdr Api Configuration Files; Table 72: Cdr Api Configuration Files - Grandstream Networks UCM6510 IP PBX User Manual

RECORDING FILES

The recording files recorded by "Auto Record" per extension/per trunk, or via feature code "Audio Mix
Record" are listed here. Users could click on
recording file in .wav format; or click on
To sort the recording file, click on the title "Caller", "Callee" or "Call Time" for the corresponding column.
Click on the title again can switch the sorting mode between ascending order or descending order.

CDR API CONFIGURATION FILES

The UCM6510 supports third party billing interface API for external billing software to access CDR on the
PBX. The API uses HTTPS to request the CDR data matching given parameters as configured on the
third party application. Before accessing the API, the administrators need enable API and configure the
access/authentication information on the UCM6510 first.
Enable
TLS Bind Address
TLS Private Key
TLS Cert
TLS Authentication
Name
TLS Authentication
Password
Permitted
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
to delete the recording file.

Table 72: CDR API Configuration Files

Enable/Disable CDR API. The default setting is disabled.
Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
interfaces. The port number is optional and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the TLS
socket won't bind to multiple IP addresses. The default setting is 0.0.0.0:8443.
Upload TLS private key. The size of the key file must be under 2MB. This file will be
renamed as 'private.pem' automatically.
Upload TLS cert. The size of the certificate must be under 2MB. This is the certificate
file (*.pem format only) for TLS connection. This file will be renamed as
"certificate.pem" automatically. It contains private key for the client and signed
certificate for the server.
Configure the user name for TLS authentication. If not configured, authentication will
be skipped.
Configure the password for TLS authentication. This is optional.
Specify a list of IP addresses permitted by CDR API. This creates an AIP-specific
access control list. Multiple entries are allowed.
For example, "192.168.40.3/255.255.255.255" denies access from all IP addresses
except 192.168.40.3.
UCM6510 IP PBX User Manual
to play the recording file; click on to download the
Page 208 of 229