Configuring Ies Subscriber Interface Parameters - Alcatel-Lucent 7750 SR Manual

Configuring IES Subscriber Interface Parameters

NOTE: Subscriber interfaces operate only with basic (or enhanced) subscriber managment. At the
very least, a host, either statically configured or dynamically learned by DHCP must be present in
order for the interface to be useful.
Refer to
subscriber interface parameters.
The following example displays a subscriber interface configuration:
A:ALA-48>config>service>ies>sub-if# info
----------------------------------------------
----------------------------------------------
A:ALA-48>config>service>ies>sub-if#
7750 SR OS Services Guide
IES Services Command Reference on page 897
address 143.144.140.1/24
group-interface "abc-if" create
sap 1/1/19:0 create
ingress
qos 2
filter ip 10
exit
static-host ip 143.144.145.100 mac 00:01:00:00:00:01 create
exit
exit
exit
Internet Enhanced Services
for CLI syntax to configure IES
Page 885