Clear Commands - Alcatel-Lucent 7705 Configuration Manual

Filter Command Reference

Clear Commands

ip
Syntax ip ip-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description
This command clears the counters associated with the IPv4 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default
clears all counters associated with the IPv4 filter policy entries
Parameters ip-filter-id — the IPv4 filter policy ID
entry-id — only the counters associated with the specified filter policy entry will be cleared
ingress — only the ingress counters will be cleared
egress — only the egress counters will be cleared
ipv6
Syntax ipv6 ipv6-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description This command clears the counters associated with the IPv6 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the IPv6 filter policy entries
Parameters
ipv6-filter-id — the IPv6 filter policy ID
entry-id — only the counters associated with the specified filter policy entry will be cleared
ingress — only the ingress counters will be cleared
egress — only the egress counters will be cleared
404
Values 1 to 65535
Values 1 to 64
Values 1 to 65535
Values 1 to 64
7705 SAR OS Router Configuration Guide