The following syntax shows an example of extracting and reinjecting packets to a system IP
address. An example for a loopback address would be similar.
CLI Syntax:
Example:
A:ALU-7>config>filter>ip-filter# info
----------------------------------------------
----------------------------------------------
A:ALU-7>config>filter>ip-filter#
7705 SAR OS Router Configuration Guide
config>filter# ip-filter filter-id [create]
entry entry-id
action forward [next-hop {ip-address | indirect
ip-address}] [fc fc-name [priority low |
high]]
match
config>filter# ip-filter 12
config>filter>ip-filter# entry 112 create
config>filter>ip-filter>entry$ action forward next-hop
indirect 10.10.10.10
config>filter>ip-filter>entry# match
config>filter>ip-filter>entry>match# dscp be
config>filter>ip-filter>entry>match# exit
scope exclusive
entry 12 create
match
dscp be
exit
action forward next-hop indirect 10.10.10.10
exit
dscp dscp-name
Filter Policies
299