Alcatel-Lucent 7705 Configuration Manual page 345

match
Syntax match [protocol protocol-id]
no match
Context config>filter>ip-filter>entry
Description This command enables the context to enter match criteria for the IPv4 filter entry. When the match
criteria have been satisfied, the action associated with the match criteria is executed.
If more than one match criterion (within one match statement) is configured, all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters
protocol — the protocol keyword configures an IP protocol to be used as an IP filter match
protocol-id — configures the decimal value representing the IP protocol to be used as an IP filter
7705 SAR OS Router Configuration Guide
criterion. The protocol type such as TCP or UDP is identified by its respective protocol
number.
match criterion. Common protocol numbers include ICMP(1), TCP(6), UDP(17). The no
form of the command removes the protocol from the match criteria.
Values 0 to 255 (values can be expressed in decimal, hexadecimal, or
binary – DHB)
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp,
idrp, igmp, igp, ip, ipv6, ipv6-icmp, ipv6-no-nxt, ipv6-opts,
ipv6-route, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp,
stp, tcp, udp, vrrp
* — udp/tcp wildcard
Protocol ID Protocol
1 icmp
2 igmp
4 ip
6 tcp
8 egp
9 igp
17 udp
27 rdp
41 ipv6
43 ipv6-route
45 idrp
46 rsvp
47 gre
Description
Internet Control Message
Internet Group Management
IP in IP (encapsulation)
Transmission Control
Exterior Gateway Protocol
Any private interior gateway
User Datagram
Reliable Data Protocol
IPv6
Routing Header for IPv6
Inter-Domain Routing Protocol
Reservation Protocol
General Routing Encapsulation
Filter Policies
345