Alcatel-Lucent 7705 Configuration Manual page 372

Filter Command Reference
profile-name — specifies the name of the profile group
name
Syntax name policy-name
no name policy-name
Context config>security>policy
Description
This command configures a policy group name.
The no form of the command removes the configured policy group name.
Parameters policy-name — specifies the name of the policy
session-high-wmark
Syntax session-high-wmark percentage
no session-high-wmark
Context config>security
Description This command configures the high-watermark threshold for NAT sessions. The alarm is raised when
the high-watermark threshold is reached or exceeded. The value must be greater than or equal to the
session-low-wmark value.
The no form of the command removes the high-watermark setting.
Default no session-high-wmark
Parameters
percentage — specifies the high-watermark threshold
session-low-wmark
Syntax session-low-wmark percentage
no session-low-wmark
Context config>security
Description
This command configures the low-watermark threshold for NAT sessions. The alarm is cleared when
the session utilization percentage is equal to or less than the low-watermark threshold. The value must
be lower than or equal to the session-high-wmark value.
372
Values 1 to 32 characters (must start with a letter)
Values 1 to 32 characters (must start with a letter)
Values 1 to 100
7705 SAR OS Router Configuration Guide