Alcatel-Lucent 7705 Configuration Manual page 349

IP and MAC Filter Match Criteria Commands
dscp
Syntax dscp dscp-name
no dscp
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match
criterion.
The no form of the command removes the DSCP match criterion.
Default
no dscp
Parameters dscp-name — a DSCP name that has been previously mapped to a value using the dscp-name
dst-ip
Syntax dst-ip {ip-address mask | ip-address netmask}
no dst-ip
Context config>filter>ip-filter>entry>match
Description This command configures a destination IPv4 address range to be used as an IP filter match criterion.
To match on the destination IP address, specify the address and its associated mask; for example,
10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the destination IP address match criterion.
Default n/a
Parameters ip-address — the IP prefix for the IP match criterion in dotted-decimal notation
7705 SAR OS Router Configuration Guide
command. The DiffServ Code Point may only be specified by its name.
Values be | cp1 | cp2 | cp3 | cp4 | cp5 | cp6 | cp7 | cs1 | cp9 | af11 | cp11 |
af12 | cp13 | af13 | cp15 | cs2 | cp17 | af21 | cp19 | af22 | cp21 |
af23 | cp23 | cs3 | cp25 | af31 | cp27 | af32 | cp29 | af33 | cp31 | cs4 |
cp33 | af41 | cp35 | af42 | cp37 | af43 | cp39 | cs5 | cp41 | cp42 |
cp43 | cp44 | cp45 | ef | cp47 | nc1 | cp49 | cp50 | cp51 | cp52 | cp53 |
cp54 | cp55 | nc2 | cp57 | cp58 | cp59 | cp60 | cp61 | cp62 | cp63
Values 0.0.0.0 to 255.255.255.255
Filter Policies
349