Modifying Interface Parameters - Alcatel-Lucent 7705 Configuration Manual

Modifying Interface Parameters

Starting at the config>router level, navigate down to the router interface context.
To modify an IP address, perform the following steps:
Example:
To modify a port, perform the following steps:
Example:
The following example displays the interface configuration.
A:ALU-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
#------------------------------------------
A:ALU-A>config>router#
7705 SAR OS Router Configuration Guide
A:ALU-A>config>router# interface "to-sr1"
A:ALU-A>config>router>if# shutdown
A:ALU-A>config>router>if# no address
A:ALU-A>config>router>if# address 10.0.0.25/24
A:ALU-A>config>router>if# no shutdown
A:ALU-A>config>router# interface "to-sr1"
A:ALU-A>config>router>if# shutdown
A:ALU-A>config>router>if# no port
A:ALU-A>config>router>if# port 1/1/2
A:ALU-A>config>router>if# no shutdown
interface "system"
address 10.0.0.103/32
exit
interface "to-sr1"
address 10.0.0.25/24
port 1/1/2
exit
router-id 10.10.10.104
IP Router Configuration
77