Alcatel-Lucent 7705 Configuration Manual page 275

IP Filters
IPv4 filters can be applied to the following entities:
Ingress filters affect only incoming packets regardless of whether the packets need to be
forwarded to a downstream router or are destined for the 7705 SAR.
IPv6 filters can be applied to the following entities:
MAC Filters
MAC filters can be applied to the following entities:
VLAN Filters
VLAN filters can be applied to ring ports at the ingress point on the 2-port 10GigE (Ethernet)
Adapter card and 2-port 10GigE (Ethernet) module. VLAN filters are blocked on all other
adapter cards and modules.
7705 SAR OS Router Configuration Guide
• ingress and egress network interfaces, which affect incoming traffic from the
network link and outgoing traffic to the network link
• ingress IES management SAPs, which affects incoming node management traffic
• ingress pseudowire SAPs (Epipes and Ipipes), VPLS SAPs, VPRN SAPs, and IES
SAPs, which affects incoming user traffic
• ingress VPLS SDPs (spoke and mesh), which affects incoming traffic from the
remote end of the service
• ingress IES and VPRN interface spoke SDPs, which affects incoming traffic from the
remote end of the service
• egress VPRN and IES SAPs, and egress VPLS SAPs (Ethernet SAPs only), which
affects outgoing user traffic
• ingress and egress Ethernet network interfaces (with null or dot1q encapsulation)
• ingress and egress network interfaces on the 4-port OC3/STM1 Clear Channel
Adapter card (with POS encapsulation)
• ingress and egress IES SAPs
• ingress VPLS SAPs, which affects incoming user traffic
• ingress VPLS SDPs (spoke and mesh), which affects outgoing user traffic
Filter Policies
275