Vrrp Monitor Commands - Alcatel-Lucent 7705 Configuration Manual

VRRP Command Reference

VRRP Monitor Commands

instance
Syntax instance interface interface-name vrid virtual-router-id [ipv6] [interval seconds] [repeat
repeat] [absolute | rate]
Context monitor>router>vrrp
Description This command enables monitoring for VRRP instances.
Parameters interface-name — specifies the name of the existing IES/VPRN interface on which VRRP is
virtual-router-id — specifies the virtual router ID for the existing IES/VPRN interface, expressed
ipv6 — specifies monitoring the IPv6 instance
seconds — specifies the interval for each display in seconds
repeat — specifies the number of times the command is repeated
absolute — specifies that raw statistics are displayed, without processing. No calculations are
rate — specifies the rate-per-second for each statistic instead of the delta
Output The following output is an example of a router VRRP instance summary information.
Sample Output
monitor router vrrp instance interface n2 vrid 1
*A:7705:DutA#
===============================================================================
Monitor statistics for VRRP Instance 10 on interface "vrrpMasNode"
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Become Master
Adv Sent
Pri Zero Pkts Sent
268
configured
as a decimal integer
Values 1 to 255
Values
3 to 60
Default 5
Values 1 to 999
Default
10
performed on the delta or rate statistics.
monitor router vrrp instance interface vrrpMasNode vr-id 10 absolute
: 0
: 2
: 0
Master Changes
Adv Received
Pri Zero Pkts Rcvd: 0
7705 SAR OS Router Configuration Guide
: 0
: 0