Alcatel-Lucent 7705 Configuration Manual page 458

Route Policy Command Reference
policy-options
Syntax [no] policy-options
Context config>router
Description This command enables the context to configure route policies. Route policies are applied to the routing
protocol.
The no form of the command deletes the route policy configuration.
Default
n/a
458
Values as-number:comm-val1 — the as-number is the Autonomous
System Number (ASN), where:
as-number:
comm-val1:
reg-exp — a regular expression string. Allowed values are any
string up to 256 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
ext-comm — where ext-comm is defined as
type:{ip-address:comm-val1 | as-number:comm-val2}and where:
type:
ip-address:
comm-val1:
as-number:
comm-val2:
well-known-comm — one of the keywords no-advertise,
no-export, no-export-subconfed, none
0 to 65535
0 to 65535
target or origin (keywords that
denote the community as an
extended community of type
route target or route origin,
respectively)
a.b.c.d
0 to 65535
0 to 65535
0 to 4294967295 (as-number and
comm.-val2 allow the same values
as described above for regular
community values)
7705 SAR OS Router Configuration Guide