Alcatel-Lucent 7705 Configuration Manual page 192

IP Router Command Reference
static-arp
Syntax static-arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description
This command displays the router static ARP table sorted by IP address.
If no options are present, all ARP entries are displayed.
192
Table 34: Show Router Advertisement Output Fields (Continued)
Label
Max Advert Interval
Min Advert Interval
Managed Config
Other Config
Reachable Time
Router Lifetime
Retransmit Time
Hop Limit
Link MTU
Autonomous Flag
On-link flag
Preferred Lifetime
Valid Lifetime
Description
The maximum interval between sending router advertisement messages
The minimum interval between sending router advertisement messages
True — DHCPv6 has been configured
False — DHCPv6 is not available for address configuration
True — there are other stateful configurations
False — there are no other stateful configurations
The time, in milliseconds, that a node assumes a neighbor is reachable
after receiving a reachability confirmation
The router lifetime, in seconds
The time, in milliseconds, between retransmitted neighbor solicitation
messages
The current hop limit
The MTU number that the nodes use for sending packets on the link
True — the prefix can be used for stateless address autoconfiguration
False — the prefix cannot be used for stateless address
autoconfiguration
True — the prefix can be used for onlink determination
False — the prefix cannot be used for onlink determination
The remaining time, in seconds, that this prefix will continue to be
preferred
The length of time, in seconds, that the prefix is valid for the purpose of
onlink determination
7705 SAR OS Router Configuration Guide