Alcatel-Lucent 7705 Configuration Manual page 346

Filter Command Reference
match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description
This command enables the context to enter match criteria for the IPv6 filter entry. When the match
criteria have been satisfied, the action associated with the match criteria is executed.
If more than one match criterion (within one match statement) is configured, all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
346
Protocol ID Protocol
58 ipv6-icmp
59 ipv6-no-nxt
60 ipv6-opts
80 iso-ip
88 eigrp
89 ospf-igp
97 ether-ip
98 encap
102 pnni
103 pim
112 vrrp
115 l2tp
118 stp
123 ptp
124 isis
126 crtp
127 crudp
Note:
• PTP in the context of IP filters is defined as Performance Transparency Protocol. IP
protocols can be used as IP filter match criteria; the match is made on the 8-bit protocol
field in the IP header.
• PTP in the context of SGT QoS is defined as Precision Timing Protocol and is an
application in the 7705 SAR. The PTP application name is also used in areas such as
event-control and logging. Precision Timing Protocol is defined in IEEE 1588-2008.
Description
ICMP for IPv6
No Next Header for IPv6
Destination Options for IPv6
ISO Internet Protocol
EIGRP
OSPFIGP
Ethernet-within-IP Encapsulation
Encapsulation Header
PNNI over IP
Protocol Independent Multicast
Virtual Router Redundancy Protocol
Layer Two Tunneling Protocol
Schedule Transfer Protocol
Performance Transparency Protocol
ISIS over IPv4
Combat Radio Transport Protocol
Combat Radio User Datagram
7705 SAR OS Router Configuration Guide