Beginning The Policy Statement; Creating A Route Policy - Alcatel-Lucent 7705 Configuration Manual

Configuring Route Policy Components

Beginning the Policy Statement

Use the following CLI syntax to begin a policy statement configuration. In order for a policy
statement to be complete, an entry must be specified (see
CLI Syntax:
The following error message displays if you try to enter a policy options command without
entering begin first.
A:ALU-B>config>router>policy-options# policy-statement "allow all"
MINOR: CLI The policy-options must be in edit mode by calling begin before any
changes can be made.
The following example displays policy statement configuration command usage. These
commands are configured in the config>router context.
Example:
There are no default policy statement options. All parameters must be explicitly configured.

Creating a Route Policy

To enter the mode to create or edit route policies, you must enter the begin keyword at the
config>router>policy-options prompt. Other editing commands include:
Use the following CLI syntax to enter the edit mode:
CLI Syntax:
The following example displays some commands to configure a policy statement. Policy
option commands are configured in the config>router context. Use the commit
command to save the changes.
436
config>router>policy-options
begin
config>router# policy-options
policy-options# begin
• the commit command, which saves changes made to route policies during a session
• the abort command, which discards changes that have been made to route policies
during a session
config>router>policy-options
begin
policy-statement name
description text
7705 SAR OS Router Configuration Guide
Configuring an Entry).