Alcatel-Lucent 7705 Configuration Manual page 82

IP Router Command Reference
Router Interface Commands
config
82
— router [router-name]
— [no] interface ip-int-name
— address
| interface-name]] [vendor-class-id vendor-class-id]
— no address
— [no] allow-directed-broadcasts
— arp-retry-timer
— no arp-retry-timer
— arp-timeout
— no arp-timeout
— bfd transmit-interval [receive receive-interval] [multiplier multiplier] [type np]
— no bfd
— description
— no description
— dhcp
—
— no
—
— no
— [no]
—
— no
— [no]
— egress
—
— no
—
—
— no
—
— no
— eth-cfm
— mep mep-id domain md-index association ma-index
— no mep mep-id domain md-index association ma-index
{ip-address/mask | ip-address netmask | dhcp} [client-identifier [ascii-value
ms-timer
seconds
description-string
description description-string
description
gi-address ip-address [src-ip-addr]
gi-address
option
— action {replace | drop | keep}
— no action
— circuit-id [ascii-tuple | port-id | if-name]
— no circuit-id
— [no] copy-82
— remote-id [mac | string string]
— no remote-id
server server1 [server2...(up to 8 max)]
server
shutdown
agg-rate-limit agg-rate [cir cir-rate]
agg-rate-limit
filter ip ip-filter-id
filter ipv6 ipv6-filter-id
filter [ip ip-filter-id | ipv6 ipv6-filter-id]
queue-policy name
queue-policy
— [no] ccm-enable
— ccm-ltm-priority priority
— no ccm-ltm-priority
— [no] dual-ended-loss-test-enable
— alarm-threshold percentage
— no alarm-threshold
— alarm-clear-threshold percentage
— no alarm-clear-threshold
— [no] eth-test-enable
7705 SAR OS Router Configuration Guide