Table 12 Show Bfd Session Output Fields - Alcatel-Lucent 7705 Configuration Manual

IP Router Command Reference
session
Syntax session [src ip-address [dst ip-address | detail]]
Context show>router>bfd
Description This command displays session information.
Parameters ip-address — displays the interface information associated with the specified IP address
Output The following output is an example of BFD session information, and
Sample Output
*A:ALU-1# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface
-------------------------------------------------------------------------------
net1_1_2
net1_2_3
-------------------------------------------------------------------------------
No. of BFD sessions: 2
===============================================================================
*A:ALU-1#
150
Values a.b.c.d (host bits must be 0)
Remote Address
12.1.2.1
12.2.3.2
Table 12: Show BFD Session Output Fields
Label
State
Protocol
Tx Intvl
Tx Pkts
Rx Intvl
Rx Pkts
Mult
State
Protocol
Up (3)
None
Up (3)
None
Description
Displays the administrative state for this BFD session
Displays the active protocol
Displays the interval, in milliseconds, between the transmitted BFD
messages to maintain the session
Displays the number of transmitted BFD packets
Displays the expected interval, in milliseconds, between the received
BFD messages to maintain the session
Displays the number of received packets
Displays the integer used by BFD to declare when the neighbor is down
7705 SAR OS Router Configuration Guide
Table 12 describes the fields.
Tx Intvl Rx Intvl Mult
Tx Pkts Rx Pkts
100 100 3
5029 5029
100 100 3
156367 156365